628495
21
Zoom out
Zoom in
Previous page
1/105
Next page
1 = No Suppression
2 = Light Suppression
3 = Heavy Suppression
4 = Half Duplex
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 1 and 4, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AECMODE13
Set AEC on input channel 1
to Heavy Suppression.
F01AECMODE13
F01AECMODE1?
Query AEC suppression
level on input channel 1.
F01AECMODE1x , where x is 1, 2, 3, or 4 depending on
the current setting of the AEC suppression level on
input channel 1.
F01AECMODE*1
Set AEC on input channels
1-8 to No Suppression.
F01AECMODE*àààààààà
F01AECMODE*ààààêêêê
Set AEC on input channels
1-4 to No Suppression and
AEC on input channels 5-8
to Half Duplex.
F01AECMODE*ààààêêêê
F01AECMODE*?
Query AEC suppression
level on input channels 1-8.
F01AECMODE*abcdefgh, where a-h are each à, å, ç,
or ê depending on the the current setting of the AEC
suppression levels on input channels 1-8.
8.4. AGC -- Enable or Disable Mic/Line Input Automatic Gain
Control
This command sets or queries the status of the Automatic Gain Control (AGC) algorithm on input channels 1-8 .
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this type
of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AGC31
Enable AGC on input channel 3 .
F01AGC31
F01AGC10
Disable AGC on input channel 1 .
F01AGC10
F01AGC12
Toggle AGC state on input channel 1 .
F01AGC1x , where x is 0 or 1 depending on the current
state of the AGC on input channel 1 .
F01AGC2?
Query AGC state on input channel 2 .
F01AGC2x , where x is 0 or 1 depending on the current
state of the AGC on input channel 2 .
F01AGC*1
Enable AGC on input channels 1-8.
F01AGC*11111111
F01AGC*0
Disable AGC on input channels 1-8.
F01AGC*00000000
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info