628495
19
Zoom out
Zoom in
Previous page
1/105
Next page
PEQIG
Preset Set Gain Parameter for Specified Parametric EQ Input Stage
PEQIS
Preset Set Slope Parameter for Specified Parametric EQ Input Stage
PEQIT
Preset Set Type Parameter for Specified Parametric EQ Input Stage
PEQOA
Preset Set All Parameters for Specified Parametric EQ Output Stage
PEQOB
Preset Set Bandwidth Parameter for Specified Parametric EQ Output Stage
PEQOE
Preset Set Enabled Parameter for Specified Parametric EQ Output Stage
PEQOF
Preset Set Frequency Parameter for Specified Parametric EQ Output Stage
PEQOG
Preset Set Gain Parameter for Specified Parametric EQ Output Stage
PEQOS
Preset Set Slope Parameter for Specified Parametric EQ Output Stage
PEQOT
Preset Set Type Parameter for Specified Parametric EQ Output Stage
PHANTOM
Preset Enable Phantom Power on Inputs 1-8
PING
- See Which Devices Are Present
PRESETK
Global Delete One or All Presets
PRESETL
- List All Commmands in a Preset
PRESETP
Global Set Which Preset Will Be Activated At Power-Up
PRESETQ
- Execute a Preset Quietly
PRESETW
Global Save a Preset
PRESETX
- Execute a Preset
REFASGN
Preset Assign AEC Reference to Input Channel
REFGAIN
Preset Set Reference Output Gain
SGGAIN
Preset Set Gain of Signal Generator
SGMUTE
Preset Mute Signal Generator
SGTYPE
Preset Set Type of Signal Produced by Signal Generator
SSDELAY
Preset Set Delay Between Screen Saver Screens
SSEN
Preset Enable or Disable Screen Saver
SSSTART
Preset Set Idle Time Required for Screen Saver to Start
SSTEXT
Preset Set Text to be Displayed by Screen Saver
SWRESET
- Perform Soft Reset of System
SWVER
- Query Software Version
VTXMODI
Preset Enable VTX Mode on Specified Inputs
VTXMODO
Preset Enable VTX Mode on Specified Inputs
8. Command Reference
8.1. ACKMOD -- Enable or Disable Acknowledgment Mode
This command controls whether or not status messages are sent. See Section 5 for more information on status
messages. This parameter is enabled by default, and it is rarely turned off by the host controller.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info