628495
22
Zoom out
Zoom in
Previous page
1/105
Next page
F01AGC*2
Toggle AGC state on input channels 1-
8.
F01AGC*abcdefgh, where a-h are each 0 or 1 depending
on the current state of the AGC for each of the eight input
channels.
F01AGC*?
Query AGC state on input channels 1-
8.
F01AGC*abcdefgh, where a-h are each 0 or 1 depending
on the current state of the AGC for each of the eight input
channels.
8.5. AGCMAX -- Set Maximum Allowed Mic/Line Input AGC Gain
This command sets the maximum gain that the AGC can apply on input channels 1-8 . For example, if AGCMAX is
set to 10, then the AGC for that channel can apply a maximum of 10 dB of gain to the input signal.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 0 and 15, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AGCMAX13
Set AGC maximum gain on
input channel 1 to 3 dB.
F01AGCMAX13
F01AGCMAX1?
Query the AGC maximum
gain on input channel 1 .
F01AGCMAX1x where x is a number between 0 and 15,
depending on the current setting of the AGC maximum
gain on input channel 1 .
F01AGCMAX*6
Set AGC maximum gain on
input channels 1-8 to 6 dB.
F01AGCMAX*èèèèèèèè
F01AGCMAX*ääääìììì
Set AGC maximum gain on
input channels 1-4 to 0 dB
and AGC maximum gain on
input channels 5-8 to 9 dB.
F01AGCMAX*ääääìììì
F01AGCMAX*?
Query AGC maximum gain
on input channels 1-8.
F01AGCMAX*abcdefgh, wherea a-h are each between
ä and É, depending on the current setting of the AGC
maximum gain for each of the eight input channels.
8.6. AGCMIN -- Set Minimum Allowed Mic/Line Input AGC Gain
This command sets the minimum gain that the AGC can apply on input channels 1-8 . For example, if AGCMIN is
set to -10, then the AGC for that channel can apply a minimum of -10 dB of gain to the input signal.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are -15 and 0, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AGCMIN1-3
Set AGC minimum gain on
input channel 1 to -3 dB.
F01AGCMIN1-3
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info