612931
12
Zoom out
Zoom in
Previous page
1/26
Next page
12
3 Magnet Detection and Calibration
3.1 Temporarily affix the Magnet
3.1.1 Use masking tape to temporarily attach the Magnet Patch
The adhesive on the back of the Magnet Patch is very strong, so do not remove the backing paper until the Magnet
position is confirmed.
In most cases, the Magnet Patches should be
used rather than the Arm Type. If the Patch Type
Magnets result in a distance from the Sensor of
more than 10.7mm, then use the Magnet Patch
Spacer to reduce the distance, or, if the Sensor
to Magnet distance is outside the range 1.5 –
10.7mm then use the Arm Type Magnets.
Caution: Even when using the Magnet Patch
Spacer, attach the Magnet temporarily first until
the position of the Magnet is confirmed. When
confirmed, attach the Spacer to the frame first,
then attach the Magnet to the Spacer
3.1.2 Rotate the rank to confirm the position of the magnets.
The Magnet should be in one of the positions shown below, on a circle around the crank axis.
The radius of this circle should be such that the Magnet passes the magnetic sensor
Approximate distance from axis of crank for magnets:
Left side: 53mm from Crank Axis.
Right Side: 42mm from Crank Axis.
Left Side Photo shows three possible options for Magnet Position.
Only one magnet is required on each side.
左側: 右側:
①①
Left
Ri
g
ht
= Sensor
Attach the magnet so that when
the crank is rotated, the sensor
passes over it in the direction
shown.
Magnet Patch Spacer
Attach this
side to the
frame.
Attach the
Magnet
Patch to
this side.
3.6mm
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SGY-PM910HR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SGY-PM910HR in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SGY-PM910HR

Pioneer SGY-PM910HR User Manual - English, German, Dutch, French, Italian, Spanish - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info