612931
24
Zoom out
Zoom in
Previous page
1/26
Next page
24
Question Answer
There is no menu for
switching modes.
Update the SGX-CA500
cyclecomputer to the latest firmware
version. The menu should then be
available under [Options] ->
[Pedaling Settings] -> [Mode
Switching]
The SGY-PM910H sensors are not
capable of Mode Switching. Please
update their firmware in the sensors
to the latest version.
Check the Device ID numbers of
both sensors.
It is necessary to activate the
sensors before attempting to switch
modes. Rotate the crank at least
three times to activate the sensors.
Check the positions of the magnets.
If Magnet Calibration has not been
done yet, temporarily attach the
magnets.
It is not possible to switch
modes using the SGX-
CA500. The display shows
[Low Battery].
Replace the batteries in the sensors.
Check the LED operation after
inserting new batteries.
The SGY-PM910H is not capable of
Magnet Calibration from the SGX-
CA500. Update the firmware to the
latest version.
It is necessary to activate the
sensors before doing Magnet
Calibration. Attach the Magnets
temporarily, and rotate the crank at
least three times.to activate the
sensors, then carry out Magnet
Calibration.
Check the Device ID Numbers on
each sensor.
Check the position, direction and
distance to te sensor for each
Magnet.
In Magnet Calibration
Mode on the SGX-
CA500,, the message
[Rotate the crank slowly
in the forward direction] is
displayed.
Rotate the crank slowly in the
forward direction. Rotating backward
will interfere with the calibration
operation, and correct calibration will
not be possible..
It is not possible to switch
modes using the SGX-
CA500. The display shows
[Timeout].
In Magnet Calibration
Mode on the SGX-CA500,
the count does not rise
even though the crank is
rotated.
Cyclecomputer
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SGY-PM910HR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SGY-PM910HR in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SGY-PM910HR

Pioneer SGY-PM910HR User Manual - English, German, Dutch, French, Italian, Spanish - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info