612931
13
Zoom out
Zoom in
Previous page
1/26
Next page
13
3.1.3 Temporarily affix the Magnet.
For the left and right sides, try to
affix the magnet so that it is within
1.5mm and 10.7mm of the sensor. If
this is not possible on the Chainstay,
try the Seat Tube (right photo) or the
Down Tube.
If this distance range cannot be
achieved, try using the Magnet Patch
Spacer.
3.1.4 Turn the crank slowly.
Check that the magnet does not come in contact with the senso.
3.2 Magnet Detection (For cycle computer other than Pioneer)
If using a cycle computer other than Pioneer, the magnet position can be checked as follows.
3.2.1 Preparations
Set the bicycle on a roller or other stand.
Remove then replace the batteries in the sensors. (Check must be done within five minutes.)
3.2.2 Detecting the Magnet Position
Rotate the crank slowly at around 30rpm. Check that the LED on each sensor lights up green once in very resolution.
If this is successful proceed to 3.3.3Fixing the Magnets.
If the LEDs do not light: either the sensor is too far from the magnet, or the magnet is not in the sensor’s path. Check
3.1Temporarily affix the Magnet again.
LED lights green
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SGY-PM910HR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SGY-PM910HR in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SGY-PM910HR

Pioneer SGY-PM910HR User Manual - English, German, Dutch, French, Italian, Spanish - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info