17999
41
Zoom out
Zoom in
Previous page
1/64
Next page
41
4 Getting Started 4 Getting Started
En/Fr
EnglishFrançais
3 Press REC.
The recorder goes into record-pause mode.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
The Play light on the recorder also blinks.
The A.TRACK indicator lights if auto track numbering is
on. For more on this, see page 46.
4 Start playing the source to check
that it’s recordable.
If the recorder does not recognize the digital format, or the
source is copy-protected, the message Can’t REC or
Can’t COPY appears. In either case, you won't be able
to record digitally—use the analog inputs instead (see
Recording an Analog Source on pages 43-44).
If necessary, set the recording level (see pages 42-43).
If the signal appears OK, stop the source.
5 Check that the time display reads
0:00, then press * or # to start
recording.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
6 Restart playback of the source
material.
If the auto track indicator is lit in the display then the
recorder will start a new track each time it detects two
seconds of continuous silence. (To switch off auto track
numbering see page 46.)
Use the TIME button to switch displays during recording.
7 When you're done, press &.
After pressing &, the display shows PMA REC while it
records the track information to the disc.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
3 Appuyez sur REC.
L'enregistreur passe en mode pause d'enregistrement
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
Le témoin de lecture de l’enregistreur clignote aussi.
L'indicateur A.TRACK s'allume quand la numérotation
automatique des plages est activée. Voir la page 46 pour en
savoir plus.
4 Démarrez la lecture de la source
pour vérifier si elle est enregistrable.
Si l'enregistreur ne reconnaît pas le format numérique, ou
si la source est protégée contre l'enregistrement, le message
Can't REC ou Can't COPY apparaît.
Dans ce cas, l’enregistrement numérique sera impossible -
utilisez les entrées analogiques à la place (voir
Enregistrement d’une source analogique la pages 43
suivante).
Si nécessaire, réglez le niveau d’enregistrement (Voir la
pages 42-43).
Si le signal semble correct, arrêtez la source.
5 Vérifiez que l'affichage de temps
indique 0:00, puis appuyez sur * ou
# pour démarrer l'enregistrement.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
6 Redémarrez l’enregistrement du
matériau de source.
Si l'indicateur A.Track est allumé sur l'affichage,
l'enregistreur commencera une nouvelle plage chaque fois
qu'il détectera deux secondes de silence continu. (Voir la
page 46 pour la coupure de la numérotation automatique
des plages.)
Utilisez la touche TIME pour changer d'affichage pendant
l'enregistrement.
7 L’opération terminée, pressez &.
Après la pression de &, l’afficheur indique PMA REC
pendant l’enregistrement des informations des plages sur le
disque.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PDRL77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDRL77 in the language / languages: English, French as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info