17999
43
Zoom out
Zoom in
Previous page
1/64
Next page
43
4 Getting Started 4 Getting Started
En/Fr
EnglishFrançais
Recording an Analog Source
Use the analog inputs when recording any analog source (vinyl,
cassette tape, etc.), or when recording from a digital source that is
copy protected or in an incompatible format. The recorder sets the
recording level automatically; it is not possible to adjust it
manually.
1 Press INPUT SELECTOR to choose
the digital input.
Pressing INPUT SELECTOR repeatedly switches the active
input:
ANA (analog) – DIG (digital) [ – THR (thru)]*
The recorder's display indicates the current input:
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
* This option only appears when the CD recorder is not
connected to the XC–L77 CD receiver. See page 45 for more
on using the thru input mode.
2 If the recorder is not already in a
record mode, press REC.
If there is nothing connected to the selected digital input,
the message Can’t REC appears in the display.
3 Use the DIGITAL REC LEVEL + and –
buttons (front panel) to adjust the
recording level up or down.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
The maximum adjustment possible is between -48 dB and
+12 dB.
From +12 dB down to -25 dB, adjustment is in steps of 1dB.
Below this, there are four preset levels: -30 dB, -36 dB, -42
dB and -48 dB.
If you set the level at anything other than 0 dB, the D.VOL
indicator in the display lights to remind you of the fact.
INPUT
SELECTOR
&
REC
*#
1 Appuyez sur INPUT SELECTOR pour
choisir l'entrée numérique.
La pression répétée de INPUT SELECTOR commute
l'entrée active:
ANA
(analogique) -
DIG
(numérique) [-
THR
(en boucle)]*
L'affichage de l'enregistreur indique l'entrée actuelle.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
* Cette option apparaît seulement quand l'enregistreur CD
n'est pas raccordé au récepteur CD XC-L77. Voir la page 45
pour plus d'information sur l'emploi du mode d'entrée en
boucle.
2 Si l'enregistreur n'est pas encore en
mode d'enregistrement, appuyez sur
REC.
Si rien n’est raccordé à l’entrée numérique sélectionnée, le
message Can’t REC s’affichera.
3
Utilisez les touches DIGITAL REC LEVEL
+ et - (panneau avant) pour augmenter
ou réduire le niveau d'enregistrement.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
L'ajustement maximum possible est entre -48 dB et +12 dB.
De +12 à -25 dB, l'ajustement se fait par pas de 1 dB. Au-
dessous, il y a quatre niveaux préréglés: -30 dB, -36 dB, -42
dB et -48 dB.
Si vous réglez le niveau à une valeur autre que 0 dB,
l'indicateur D.VOL s'allume sur l'affichage pour vous le
rappeler.
Enregistrement d'une
source analogique
Utilisez les entrées analogiques à l'enregistrement d'une source
analogique (disque en vinyle, cassette etc.) ou pour
l'enregistrement d'une source numérique protégée contre la copie
ou d'un format incompatible. L'enregistreur règle
automatiquement le niveau d'enregistrement; il n'est pas possible
de l'ajuster manuellement.
INPUT
SELECTOR
&
REC
*#
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PDRL77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDRL77 in the language / languages: English, French as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info