17999
44
Zoom out
Zoom in
Previous page
1/64
Next page
44
4 Getting Started 4 Getting Started
En/Fr
1 Load a CD–R or CD–RW disc.
If it’s a blank disc, the display indicates this:
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
If the disc isn’t blank, use the TIME button to check that
there's enough space on it for what you want to record.
2 Press INPUT SELECTOR to choose
analog input.
Pressing INPUT SELECTOR repeatedly switches the active
input:
ANA (analog) – DIG (digital) [ – THR (through)]*
The recorder's display indicates the current input:
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
* This option only appears when the CD recorder is not
connected to the XC–L77 CD receiver. See the following page
for more on using the thru input mode.
3 Make sure the disc is stopped, then
press REC.
The recorder goes into record-pause mode.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
4 Check that the time display reads
0:00, then press * or # to start
recording.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
5 Start playback of the source
material.
If the A.TRACK indicator is lit in the display then the
recorder will start a new track each time it detects a signal
after at least two seconds of continuous silence. (To switch
off auto track numbering see page 46.)
6 When you're done, press &.
After pressing &, the display shows PMA REC while it
records the track information to the disc.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
1 Chargez un disque CD-R ou CD-RW.
Si le disque est vierge, cet affichage apparaît.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
Si le disque n'est pas vierge, utilisez la touche TIME pour
vérifier s'il y a suffisamment d'espace pour l'enregistrement
que vous souhaitez faire.
2 Appuyez sur INPUT SELECTOR pour
sélectionner l'entrée analogique.
La pression répétée de INPUT SELECTOR commute
l'entrée active:
ANA
(analogique) -
DIG
(numérique) [-
THR
(en boucle)]*
L’afficheur de l’enregistreur indique l’entrée actuelle.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
* Cette option apparaît seulement quand l'enregistreur CD
n'est pas raccordé au récepteur CD XC-L77. Voir la page
suivante pour plus d'informations sur le mode d'entrée en
boucle.
3 Vérifiez que le disque est arrêté, puis
appuyez sur REC.
L’enregistreur passera en mode pause d’enregistrement.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
4 Vérifiez que l'affichage de temps
indique 0:00, puis appuyez sur * ou
# pour démarrer l'enregistrement.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
5 Démarrez la lecture du matériau de
source.
Si l’indicateur A.TRACK est allumé sur l’afficheur,
l’enregistreur démarrera une nouvelle plage chaque fois
qu’il détectera un signal après au moins deux secondes de
silence continu. (Pour désactiver la numérotation
automatique des plages, voir la page 46.)
6 L’opération terminée, pressez &.
Après la pression de &, l’afficheur indique PMA REC pendant
l’enregistrement des informations de la plage sur le disque.
RDM PGM RPT-1
CD-RW
D.VOL
L
R
SYNC DIGITAL FINALIZE
SKIP ON A.TRACK FADER
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PDRL77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDRL77 in the language / languages: English, French as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info