643482
33
Zoom out
Zoom in
Previous page
1/52
Next page
Description of activity Display
The user attempts to restart the stove during the shutdown stage when the stove
is still hot by pressing the ON/OFF key for a few moments.
If the readout “WAIT FOR START UP” appears on the display by pressing the ON/OFF
key for a few moments, it means that the stove is still hot and it is necessary to wait
for it to cool.
The new ignition cycle will be inhibited until the stove ends the cooling phase.
After waiting for a few minutes the user can restart the stove and a new ignition cycle
will start automatically from the control stage.
WAIT FOR START UP
WAIT FOR START UP
DT2040123-00
Description of activity Display
Once the stove is properly lit, it will stabilise in the normal mode of operation.
The power setting appears on the display: P1, P2, P3, P4, P5.
The time or the room temperature appears on the display. (See paragraph DISPLAY
MODE”).
The power and the room temperature settings may be adjusted during normal
operation.
12:50 P2
POWER
To change the power setting, press key 6.
The scrolling readout SET POWER appears on the display.
Use key 5 or 6 to select the required power level, which will appear on the display.
The display automatically returns to its initial status.
P2 SET POWER
ROOM TEMPERATURE
To change the temperature setting, press the SET key. The scrolling readout SET ROOM
TEMP appears on the display.
Use key 1 or 2 to select the required temperature from a scale between 44°F and 86°F
(7°C and 30°C), which will appear in the left display.
The display automatically returns to its initial status.
25° SET ROOM
TEMP
When the desired temperature has been reached the readout OK appears in the
initial display and the stove operates at minimum power even if the display shows
the originally set power level. The temperature can be read by the stove or by an
external thermostat. To choose whether the stove or the external thermostat will read
the temperature see the paragraph EXTERNAL THERMOSTAT”.
If using an external thermostat the readout “TON” appears in the display and the
readings from the stove are cut out.
14:15 OK P2
Automatic grate cleaning is activated during regular stove operation at programmed
intervals that are set by Superior personnel. This procedure is necessary in order
to eliminate accumulation of ash or encrustation that would prevent correct stove
operation and must therefore be removed.
16:30 CLEANING
GRATE
If the temperature rises above a xed value during normal stove operation at maximum
power, the fan motor operates at maximum speed and the stove runs at reduced heat
input for a few minutes to help disperse the heat and prevent the appliance from
possibly overheating.
16:50 MAX VENT
FLUE COOL
NORMAL OPERATION
DT2011662-00
H07029330 / DT2001081 – 02
33
English
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta SABRINA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta SABRINA in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info