643482
34
Zoom out
Zoom in
Previous page
1/52
Next page
Description of activity Display
Stove operation can be regulated by any kind of external room thermostat connected
to the electronic board.
To connect the thermostat, see paragraph INSTALLING THE EXTERNAL ROOM
THERMOSTAT”.
Operation of the external thermostat depends on the stove temperature setting.
- If the set stove temperature is less than the room temperature, the external thermostat
prevails. (It is advisable to set a minimum value of 44°F (7°C) for the stove).
- If the set stove temperature is more than the room temperature, the internal stove
thermostat prevails. The external thermostat is disabled.
The readout TON appears in the display.
a The room sensor must be connected. If the room sensor is not connected
the appliance does not change the power and operates to user settings.
EXTERNAL THERMOSTAT
DT2011663-00
Description of activity Display
If there is a blackout while the stove is in operation, there are two possibilities of
procedure according to stove set-up:
- blackout without timer thermostat settings;
- blackout with timer thermostat settings.
Blackout without timer thermostat settings.
When the electricity supply is restored, the appliance restarts automatically.
•The grate cleaning phase activates.
•The fan operates at full speed to allow the stove to cool.
•The automatic stove restart cycle starts (the steps detailed in the ‘STARTUP’ phase
are repeated automatically).
•Once the ignition cycle has been completed the stove operates normally at power
level 2.
Blackout with timer thermostat settings.
There are 3 possible situations.
•Blackout straddling the time set for ignition: the stove does not restart.
•Blackout straddling the time set for shutdown: the stove restarts when the electricity
supply is restored.
•Blackout within the programmed operating time band: the stove restarts when the
electricity supply is restored.
Restarting is carried out with the same procedure as listed in Blackout without timer
thermostat settings”.
16:30 CLEANING
POWER SUPPLY CUTOFF
DT2011665-01
Description of activity Display
Hold the ON/OFF key down for several seconds.
Fuel loading stops, while the cooling fan and the extractor fan continue to operate until
the stove is cool.
The scrolling readout CLEANING GRATE rst appears followed by the readout OFF.
If the ENERGY SAVING MODE has been activated, the readout OFF is followed by ENS
to remember that energy saving mode is enabled.
a Never unplug the stove from the power supply at this stage as this could
cause internal problems and jeopardise subsequent ignition operations.
CLEANING GRATE
SHUTDOWN
DT2011664-00
H07029330 / DT2001081 – 02
34
English
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta SABRINA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta SABRINA in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info