Manual Parkside PZKS 1500 B2 - IAN 280657 (page 97 of 106) (English, German, Dutch, French)

706372

Zoom out

Zoom in

1/106

GB / IE / NI

Safety measures must be defined to protect

the operator. They must be based on an

assessment of exposure during actual usage

conditions (all parts of the operating

cycle must be accounted for, e.g. periods

when the power tool is switched off and

when it is switched on, but not operating

under load).

Reduce the vibration risk by

- wearing protective gloves during use and

- limiting the working time and reducing

the actual operation time.

Residual risks

The machine has been built according to

the state of the art and the recognised

technical safety requirements.However,

individual residual risks can arise during

operation.

•Healthhazardduetoelectricalpower,

with the use of improper electrical

connection cables.

•Furthermore,despiteallprecautions

having been met, some non-obvious

residual risks may still remain.

•Residualriskscanbeminimisedifthe

"safety instructions" and the "Proper use"

are observed along with the whole of the

operating instructions.

•Donotloadthemachineunnecessarily:

excessive pressure when sawing will

quickly damage the saw blade, which

results in reduced output of the machine

in the processing and in cut precision.

•Whencuttingplasticmaterial,please

always use clamps: the parts which

should be cut must always be fixed

between the clamps.

•Avoidaccidentalstartingofthemachine:

the operating button may not be pressed

when inserting the plug in an outlet.

•Usethetoolthatisrecommendedinthis

manual. In doing so, your mitre saw

provides optimal performance.

•Handsmayneverentertheprocessing

zone when the machine is in operation.

Release the handle button and switch off

the machine prior to any operations.

7. Before starting the

equipment

•Theequipmentmustbesetupwhereit

can stand securely. Secure the machine

on a workbench or a stand with 4 screws

through the holes in the fixed saw table

(16).

•Allcoversandsafetydeviceshavetobe

properly fitted before the equipment is

switched on.

•Itmustbepossibleforthebladetorun

freely.

•Whenworkingwithwoodthathasbeen

processed before, watch out for foreign

bodies such as nails or screws, etc.

•BeforeyoupresstheON/OFFswitch

check that the saw blade is fitted

correctly. Moving parts must run

smoothly.

•Beforeyouconnecttheequipmenttothe

power supply make sure the data on the

rating plate are dentical to the mains

data.

8. Attachment and operation

8.1 Attaching the saw

(Fig1/2/3/4/5)

Avoid unintentional starting of the

machine. During assembly and for all

work on the machine, the power plug

must not be connected to the mains

supply.

- Attach the carry handle (22) to the

machine head (4) with 2 x screws.

Before starting the equipment/Attachment and operation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PZKS 1500 B2 - IAN 280657 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PZKS 1500 B2 - IAN 280657 Manual

Product: