Manual Parkside PZKS 1500 B2 - IAN 280657 (page 96 of 106) (English, German, Dutch, French)

706372

Zoom out

Zoom in

1/106

91GB / IE / NI

• Thelaseroutletopeningislocatedatthe

front of the laser's visible end; see Fig.

21 No. (13).

• Donotlookdirectlyintothelaserbeam

with unprotected eyes.

• Neverlookintothepathofthebeam.

• Neverpointthelaserbeamtowards

reflecting surfaces and persons or

animals. Even a laser beam with a low

output can cause damage to the eyes.

• Caution-methodsotherthanthose

specified here can result in dangerous

radiation exposure.

• Neveropenthelasermodule.unexpected

exposure to the beam can occur.

• Thelasermaynotbereplacedwitha

different type of laser.

• Repairsofthelasermayonlybecarried

out by the laser manufacturer or an

authorised representative.

6. Technical data

Rated voltage 220 - 240 V ~ 50Hz

Power 1200 W

Operating mode S6 25% 1500 W

Idle speed n

5000 min

-1

Carbide saw blade

Ø210 mm x 2,6 mm x Ø30 mm

Number of teeth 24

Mitre sawing range 0°- 45° (to left and right)

Bevel sawing range 0°- 45° to the left

Maximum cutting capability

：

Mitre/Bevel Angle

Maximum cross-section

(length and depth) of the

cut / the workpiece (mm)

Horizontal Vertical

0° 0° 340 x 58 mm

45° 0° 240 x 58 mm

0° 45° 340 x 32 mm

45° 45° 240 x 32 mm

Protection class II/

Weight approx.13 kg

Laser class 2

Wavelength of laser 650 nm

Laser output

≤

1 mW

* S6, continuous operation periodic duty.

Identical duty cycles with a period at

load followed by a period at no load.

Running time 2 minutes; duty cycle is

25% of the running time.

Minimum workpiece sizes (all workpieces

that can be clamped from the saw blade

with the supplied material clamp): 140 x

50 mm (length x width). Cutting depth,

max. (0°/0°): 58 mm

Make sure that the workpiece is always

secured with the clamping device.

Noise

Total noise values determined in accordance

with EN 61029.

sound pressure level L

98.8 dB(A)

uncertainty K

3 dB(A)

sound power level L

111.8 dB(A)

uncertainty K

3 dB(A)

Wear hearing protection.

The effects of noise can cause a loss of

hearing.

Vibration levels

Total vibration value at the handle

≤

2.5 m/s²

Measurement uncertainty: 1.5 m/s²

The measurements were performed in

accordance with EN 61029-1 and

EN 61029-2-9.

The specified vibration emission level was

measured on the basis of a standardised

test procedure and can be used to compare

power tools with one another.

The specified vibration emission level may

also be used to initially assess the

exposure.

Attention!

While actually using the power tool, the

vibration emission level may differ from the

level specified depending on how the power

tool is used.

Technical data

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PZKS 1500 B2 - IAN 280657 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PZKS 1500 B2 - IAN 280657 Manual

Product: