Manual Parkside PWSA 18 A1 - IAN 104454 (page 62 of 78) (French)

595313

Zoom out

Zoom in

1/78

dicated rotational speed is at least as

high as what has been specied on the

name plate of the device.

• Carry out a visual inspection of the

grinding disc before use. Do not use

any damaged or deformed grinding

discs. Replace any damaged or worn

grinding discs.

• Make sure that the sparks produced by

grinding do not present a danger, e.g.

reach people or ignite ammable sub-

stances.

• Always wear safety goggles, safety

gloves, respiratory protection and ear

protection when grinding, brushing and

cutting.

• Never keep the ngers between the

grinding disc and spark protection or in

close proximity to the protective hoods.

There is a risk of crushing.

• The rotating parts of the device cannot

be covered due to functional reasons.

Therefore, proceed cautiously and hold

the workpiece rmly in order to avoid

slipping which could cause your hands to

come into contact with the grinding disc.

• The workpiece gets hot during grind-

ing. Do not touch the machined area,

allow it to cool down. There is a risk of

burning. Do not use coolants or the like.

• If you are tired or have consumed al-

cohol or tablets, do not work with the

device. Always have a break on time.

• Turn off the appliance and, before do-

ing any servicing, remove the battery.

RESIDUAL RISKS

Even if properly operating and handling this

electric tool, some residual risks will remain.

Due to its construction and build, this electric

tool may present the following hazards:

a) Cuts

b) Ear damage if working without ear pro-

tection.

c) Damage to your health caused by swing-

ing your hands and arms when operat-

ing the appliance for longer periods of

time or if the unit is not held or main-

tained properly.

d) Health injuries which result from swing-

ing hand and arm, in the event that the

device is used over a longer period

of time or is not used and maintained

properly.

Warning! During operation, this elec-

tric tool generates an electromagnetic

eld which, under certain circum-

stances, may impair the functionality

of active or passive medical implants.

To reduce the risk of serious or lethal

injuries, we recommend that persons

with medical implants consult their

doctor and the manufacturer of their

medical implant before operating the

machine.

Kickback

Kickback is the sudden reaction from a chop-

ping or blocked grinder attachment such as a

grinding disc, grinding plate, wire brush etc.

Chopping or blocking leads to sudden stop-

ping of the rotating attachment. This causes

an uncontrolled electric tool to accelerate in a

direction counter to the rotational direction of

the attachment tool. If, for example, a grind-

ing disc cuts into the workpiece or blocks it,

the edge of the grinding disc that digs into

the workpiece can get caught and, through

that, break off the grinding disc or cause a

kickback. The grinding disc then moves to-

wards or away from the operator, depending

on the direction of rotation of the disc at the

blocked spot. Here, the grinding discs can

also break. A kickback is caused by wrongly

or incorrectly operating the electric tool. It can

be avoided by suitable cautionary measures,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWSA 18 A1 - IAN 104454 in the language / languages: French as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWSA 18 A1 - IAN 104454

Parkside PWSA 18 A1 - IAN 104454 User Manual - English, German, Dutch - 78 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWSA 18 A1 - IAN 104454 Manual

Product: