Manual Parkside PWSA 18 A1 - IAN 104454 (page 60 of 78) (French)

595313

Zoom out

Zoom in

1/78

eld which, under certain circum-

stances, may impair the functionality of

active or passive medical implants. To

reduce the risk of serious or lethal inju-

ries, we recommend that persons with

medical implants consult their doctor

and the manufacturer of their medical

implant before operating the machine.

Safety instructions for all ap-

plications

Common safety instructions for

grinding, sanding, working with

wire brushes and cutting grinders:

• This electric tool is to be used as

a grinder, sander, wire brush

and cutting grinder. Follow all

safety instructions, directives, il-

lustrations and facts which you

receive with the device. If you do

not follow these instructions, an electri-

cal shock, re and/or serious injury

may occur.

• This electric tool is not suitable

for cup brushes. Using the electric

tool in ways for which it is not intended

may cause hazards and injuries.

• This electric tool is not suitable

for cup wheels, mounted points

or grinding cones. Using the electric

tool in ways for which it is not intended

may cause hazards and injuries.

• This electric tool is not suitable

for polishing. Using the electric tool

in ways for which it is not intended may

cause hazards and injuries.

• Do not use any accessories that

are not specically intended and

recommended for this electric

tool by the manufacturer. Simply

because an accessory can be attached

to your electric tool does not guarantee

safe operation.

• The allowable rotation speed of

the attachment tools must be at

least as high as the highest rota-

tion speed indicated on the elec-

tric tool. Accessories that run faster

than the allowable speed can break

and y apart.

• The outside diameter and thick-

ness of the attachment tool must

correspond to the dimensions

indicated for your electric tool.

Attachment tools which are wrongly

dimensioned cannot be sufciently

shielded or controlled.

• Attachment tools with threaded

attachment must t the thread-

ing of the grinding spindle ex-

actly. For attachment tools which

are mounted through a ange,

the diameter of the hole in the

attachment tool must t the

mounting diameter of the ange.

Attachment tools which cannot be pre-

cisely attached to the electric tool turn

unevenly, vibrate very strongly and can

ultimately lead to a loss of control.

• Never use damaged attachment

tools. Check attachment tools

such as grinding discs for chip-

ping or cracks, grinding plates

for cracks, wear or strong abra-

sion and wire brushes for loose

or broken wires before using

them. If the electric tool or the

attachment tool falls off, check

whether it is damaged or, use

an undamaged attachment tool.

If you have checked the at-

tachment tool and attached it,

keep yourself and any nearby

persons beyond the level of the

rotating attachment tool and al-

low the device to run for 1 min.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWSA 18 A1 - IAN 104454 in the language / languages: French as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWSA 18 A1 - IAN 104454

Parkside PWSA 18 A1 - IAN 104454 User Manual - English, German, Dutch - 78 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWSA 18 A1 - IAN 104454 Manual

Product: