Manual Parkside PWSA 18 A1 - IAN 104454 (page 61 of 78) (French)

595313

Zoom out

Zoom in

1/78

at the highest rotational speed.

Damaged tools usually break during this

test period.

• Wear personal safety equip-

ment. Depending on the applica-

tion, use full face shields, eye

protection or safety goggles.

In so far as it is appropriate,

wear dust masks, ear protec-

tion, gloves or special aprons

which keep small grinding and

material particles away from

you. Eyes should be protected from the

foreign matter which can be caused to

y during the various applications. Dust

or breathing masks should lter the dust

that is created during operation. If you

are exposed to loud noise for a long

time, you may suffer hearing loss.

• Ensure that other people are at

a safe distance to your work-

ing area. Anyone who enters

the working area should wear

personal protective equipment.

Broken bits from the piece being worked

or broken attachment tools can y away

and cause injuries even beyond the di-

rect working area.

• Hold the electric tool only by

the insulated gripping surfaces

when performing work in which

the cutting tool may come into

contact with hidden wiring or its

own cord. Contact with a live wire

can also cause a charge in metal parts

of the device and result in an electric

shock.

• Keep the cord away from the ro-

tating attachment tool. If you lose

control of the device, the power cord

can become separated or caught and

your hand or arm may be pulled into

the rotating attachment tool.

• Never put the electric tool down

before the attachment tool has

come to a full stop. The rotating

attachment tool can come into contact

with the surface upon which it is set,

whereby you could lose control of the

electric tool.

• Never allow the electric tool to

run whilst you are carrying it.

Your clothing may accidentally come

into contact with the rotating attachment

tool and get caught and the attachment

tool could drill into your body.

• Clean the ventilation slots of

your electric tool routinely. The

motor air pulls dust into the housing

and, should too much metallic dust col-

lect, could cause electrical hazards.

• Never use the electric tool near

ammable material. Sparks could

ignite this material.

• Do not use attachment tools

which require liquid coolant.

Using water or another liquid coolant

could lead to electrical shock.

Additional safety instructions

• Connect the appliance only to a power

socket with a residual current circuit

breaker of rated residual current no

more than 30 mA.

• Keep power cords and extension cords

away from the disc. If they are dam-

aged or cut through, immediately pull

the plug from the outlet. Do not touch

the cable before it has been discon-

nected from the power supply.

Risk of electric shock!

• The replacement of the plug or the con-

nection line must always be executed

by the manufacturer of the electric tool

or his/her customer service in order to

avoid any hazards.

• Only use grinding discs where the in-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWSA 18 A1 - IAN 104454 in the language / languages: French as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWSA 18 A1 - IAN 104454

Parkside PWSA 18 A1 - IAN 104454 User Manual - English, German, Dutch - 78 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWSA 18 A1 - IAN 104454 Manual

Product: