Manual Parkside PWSA 18 A1 - IAN 104454 (page 63 of 78) (French)

595313

Zoom out

Zoom in

1/78

such as described below.

a) Hold the electric tool very

rmly and bring your body and your

arm into a position in which you can

resist the kickback force. Always use

the supplemental handle if available to

give you the best control over kickback

force or reaction time during accel-

eration. The operator can master the

kickback and reaction force through

suitable precautions.

b) Never bring your hands near a

rotating attachment tool. The at-

tachment tool can run over your hand

in the kickback.

c) Keep your body away from the

area in which the electric tool

would move during a kickback.

The kickback drives the electric tool in

the counter-direction to the rotation of

the grinding disc at the blocked spot.

d) Work particularly cautiously in

corner areas or where there are

sharp corners etc. Prevent the at-

tachment tools from recoiling from the

workpiece and jamming. The rotating

attachment tool tends to jam when near

corners, sharp edges or when it recoils

from such. This causes a loss of control

or kickback.

e) Do not use chain or toothed

saw blades. Such attachment tools

frequently cause a kickback or loss of

control over the electric tool.

Special safety instructions for

grinding and cutting

a) Use only grinders which have

been approved for your electric

tool and the protective hood in-

tended for these grinders. Grind-

ers which are not intended for the elec-

tric tool may not be sufciently shielded

and are unsafe.

b) Depressed centre grinding

wheels must be pre-mounted in

such a way that their grinding

surface does not protrude over

the level of the edge of the pro-

tective cover. An incorrectly mounted

grinding wheel which protrudes beyond

the level of the edge of the protective

cover cannot be adequately shielded.

c) The protective hood must be

securely attached to the elec-

tric tool and adjusted so that

the greatest level of safety is

reached, i.e., the smallest possible

amount of the grinder is exposed to the

operator. The protective hood should

protect the operator from broken bits

and accidental contact with the grinder.

d) Grinders may only be used for

the recommended attachment

options. For example: Never grind

with the side surface of a cutting disc.

Cutting discs are for cutting material

using the edge of the disc. Pushing

sideways on these grinders can break

them.

e) Always use undamaged clamp-

ing anges of the correct size

and shape for the grinding disc

you selected. Suitable anges sup-

port the grinding disc and thus reduce

the danger of the grinding disc break-

ing. Flanges for cutting discs can be

distinguished from anges for other

grinding discs.

f) Do not use worn grinding discs

for larger electric tools. Grinding

discs for larger electric tools are not

set up for the higher rotation speeds of

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWSA 18 A1 - IAN 104454 in the language / languages: French as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWSA 18 A1 - IAN 104454

Parkside PWSA 18 A1 - IAN 104454 User Manual - English, German, Dutch - 78 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWSA 18 A1 - IAN 104454 Manual

Product: