576693
13
Zoom out
Zoom in
Previous page
1/91
Next page
10
PWS 125 A1
GB
IE
RISK OF INJURY!
Always use the angle grinder with the blade
guard
. The blade guard should be installed
securely. Set it so that the highest possible
degree of safety is achieved, i.e. the smallest
possible part of the grinding disc is exposed
to the operator (see Figs. C, D). The blade
guard
is designed to protect the operator
from fragments and accidental contact with
the grinding tool. The blade guard has 5 stop
positions.
Turn the blade guard
to the required position
(working position).
The closed side of the blade guard
must
always be toward the operator.
Using the additional handle
CAUTION!
For safety reasons this appliance may only
be used with the additional handle
.
The additional handle
can be screwed on
the left or the right depending on the work
method.
Switching on and off
Check the accessory tool before use. It must be
properly installed, may not be damaged or damp,
should have no cracks and turn freely. Carry out
a 60 second test run. Do not use non-circular or
vibrating tools. Be aware of unusual noises and
sparks. Check whether all the fastening elements
are correctly installed.
Switching on:
Press the safety lock-out .
Press the ON/OFF switch
.
Switching off :
Let go of the ON/OFF switch
.
Setting the rotational speed
Select the desired speed as needed. Turn the
rotational speed preselector adjusting wheel
to the required setting. The required rotational
speed depends on the material being processed
and can be determined through practical tests.
The following table lists suggested settings for
the most common applications. Not all of the
accessories described are included in the
delivery.
Rotation speed preselection:
Material Use Tool Ad-
justing
wheel
Plastic,
lacquer
Polishing Lamb's
wool hood
1
Finishing Felt polish-
ing disc
1
Metal Finishing Buffi ng
wheel
1
Paint
removal
Sanding
disc
2–3
Wood,
Metal
Brushes,
Rust removal
Cup brush,
Sanding
disc
3
Metal Grinding Grinding
disc
4–6
Metal Roughing Roughing
disc
6
Metal Cutting Cutting
disc
6
Changing grinding tools
Always wear protective gloves when
changing cutting/rough grinding discs.
Press the spindle locking button
only when
the mounting spindle
is at a complete stand-
still (see Fig. A).
Press the spindle locking button
to lock the
mechanism.
Undo the tensioning nut
using the spanner
(see Fig B).
IB_102828_PWS125A1_LB3.indb 10 22.08.14 11:48
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWS 125 A1 - IAN 102828 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWS 125 A1 - IAN 102828 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info