576693
12
Zoom out
Zoom in
Previous page
1/91
Next page
9
PWS 125 A1
GB
IE
CAUTION!
The grinder continues running after being turned
off . Do not try to brake it by applying lateral
counterpressure.
Immobilise the workpiece securely. Use clamps/
vices to hold the workpiece fi rmly in place.
This is much safer than simply holding it in your
hand.
Always switch off the appliance before putting
it away and wait for the appliance to come to
a complete standstill.
Release the ON/OFF switch immediately in
the event of a power failure or when the plug
is pulled out. Move it into the OFF position.
This prevents an uncontrolled restart.
Use the appliance only for dry cutting or
sanding.
The additional handle
must be mounted on
the appliance for all work.
Materials containing asbestos may NOT be
processed. Asbestos is a known carcinogen.
Tip! This symbol indicates proper
behaviour!
DANGER! GUIDE THE APPLIANCE
THROUGH THE WORKPIECE IN
REVERSE ROTATION.
In the opposite direction there is a risk of
kickback. The appliance can be pushed out
of the cut.
Always switch the appliance on before ap-
plying it to the workpiece. After completing
the task, lift the appliance from the work piece
and then switch it off .
Always hold the appliance fi rmly with two
hands while working. Ensure that your stance
is secure and stable.
For an optimum grinding eff ect, move the ap-
pliance evenly at an angle of 15° to 30° (be-
tween grinding disc and workpiece) backwards
and forwards.
When working on angled surfaces, do not
exert great force on the workpiece. If the
rotational speed drops signifi cantly, you must
reduce the pressure exerted to allow safe and
eff ective working. If the appliance suddenly
brakes completely or jams, it must be switched
off immediately.
Cutting: Work with a moderate feed and do
not tilt the cutting disc.
Roughing and cutting discs become very
hot – let them cool down completely before
touching them.
Never use the appliance for purposes other
than the ones for which it was designed.
Always make sure that the appliance is
turned off before plugging it into the wall
socket.
In case of danger, remove the plug from the
socket immediately. Ensure that the appliance
and the power socket are easily and quickly
accessible in the event of an emergency.
Always remove the plug from the power
socket during work breaks, when adjusting
the appliance and when it is no longer in use.
The appliance must always be kept clean, dry
and free from oil or grease.
Remain alert at all times! Always pay attention
to what you are doing and act with common
sense. Never use the appliance when you are
distracted or don’t feel well.
Operation
Adjusting the blade guard
WARNING – RISK OF INJURY!
Always remove the plug from the power socket
before working on the appliance. To adjust
the blade guard , you do not need to re-
move the screws
but simply loosen them.
IB_102828_PWS125A1_LB3.indb 9 22.08.14 11:48
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWS 125 A1 - IAN 102828 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWS 125 A1 - IAN 102828 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info