Manual Parkside PWS 125 A1 - IAN 102828 (page 11 of 91) (English, German, Dutch, Danish, Swedish, Finnish)

576693

Zoom out

Zoom in

1/91

PWS 125 A1

■ Make sure that abrasive consumables and

tools are attached in accordance with the

manufacturer’s instructions and advice.

Otherwise they could become detached from

the device and result in injury and / or damage

to property.

■ Ensure that any spacers supplied and

required for the use of certain abrasive con-

sumables and tools are installed.

■ Do not use separate reducing bushes or

adapters in order to make grinding discs with

a larger bore ﬁ t.

■ When using abrasive consumables and tools

with a threaded insert make sure that the

tread is long enough for the spindle length.

Otherwise the grinding discs could become

detached from the device and result in injury

and / or damage to property.

■ Do not allow the end of the spindle to contact the

base of the hole in the abrasive consumable.

■ Do not work in areas where there may be

concealed electricity cables or gas or water

pipes. Use a suitable detector or ask your

local utility service providers. Contact with

electricity cables can lead to ﬁ re or electric

shock. Damaging a gas pipe can lead to an

explosion. Penetration of a water pipe can lead

to property damage or to electric shock.

WARNING! NOXIOUS FUMES!

► Working with harmful / noxious dusts represents

a risk to the health of the person operating the

device and to anyone near the work area.

■ When working on metal for longer periods,

connect the tool to a suitable external extrac-

tion system.

■ Ensure that there is adequate ventilation

when working on plastic, paint, varnish etc.

■ Do not soak the materials or the surface you

are about to work on with liquids containing

solvents.

■ DANGER OF INJURY! Wear close-ﬁ tting

clothing and keep long hair inside a hairnet

or suitable headwear.

■ For safety reasons this device must always be

used with the auxiliary handle in place.

■ The adjustable disc guard cover must al-

ways be in place when working with roughing,

grinding or cutting discs. Otherwise there could

be danger of injury.

■ Use the vacuum dust extraction facility if your

work generates high amounts of dust. Use suction

devices particularly approved for the purpose.

■ Use permitted consumables and tools only.

Check that the speed given on the discs is great-

er or equal to the rated speed of the device.

■ Take note of the direction of rotation and

always hold the device in such a way that the

sparks and grinding debris are thrown away

from your body. Otherwise there could be

danger of injury.

■ Make sure that the dimensions of the disc are

suitable for the device and that the disc is of

a type that ﬁ ts properly on to the mounting

ﬂ ange .

Working procedures

NOTE

►

Grinding tools should only be used for the

recommended applications. Otherwise, they

can break, be damaged or cause injuries.

Rough grinding:

Never use cutting discs for rough

grinding!

■ Move the angle grinder with moderate pres-

sure back and forth over the workpiece.

■ For soft material, move the rough grinding

disc at a ﬂ at angle over the workpiece; for

hard material at a slightly steeper angle.

Abrasive cutting:

Never use rough grinding discs for

cutting!

■ Use only tested ﬁ bre-reinforced cutting or

grinding discs that are approved for a circum-

ferential speed of no less than 80 m/s.

IB_102828_PWS125A1_LB3.indb 8 22.08.14 11:48

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWS 125 A1 - IAN 102828 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 4,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWS 125 A1 - IAN 102828 Manual

Product: