764040
26
Zoom out
Zoom in
Previous page
1/128
Next page
26
GB IE
to cool down before inspection,
changing settings etc. Maintain
the machine with care and keep
it clean.
b) Store the machine in a dry pla-
ce and out of reach of children.
c) Always allow the machine to
cool down before storage.
d) When maintaining the shred-
ding unit, be aware that it can
always still move even if the
power source is switched off by
the locking function or protecti-
ve equipment.
e) Replace worn or damaged parts
in the interests of safety. Only
use original replacement parts
and accessories.
f) Never try to circumvent the
locking function or protective
equipment.
Additional safety instructions
for machines with a collecti-
on box
Switch off the machine before
attaching or removing the col-
lection box.
Electrical safety
Caution: This is how to avoid
accidents and injuries from
an electric shock:
Prior to use, always check the
connecting cable and extension
cable for signs of damage or
wear and tear. If the cable gets
damaged during use, it must be
disconnected from the supply
network immediately. DO NOT
TOUCH THE CABLE BEFORE IT
HAS BEEN DISCONNECTED
FROM THE POWER SUPPLY. Do
not use the machine if the cable
is damaged or worn.
Keep the extension cable away
from dangerous moving parts to
prevent damage to cables that
can lead to contact with live
parts.
Use the strain relief provided to
attach the extension cable.
Damaged cables, couplings
and plugs or connection cab-
les that do not comply with the
regulations must not be used. If
the mains cable is damaged, im-
mediately remove the plug from
the mains socket. Never touch
the mains cable unless the mains
plug has been removed.
If the connection cable of this
device is damaged, it must be
replaced by the manufacturer or
their customer service or by a si-
milarly qualied person in order
to avoid hazards.
Do not use the device if the switch
cannot be turned on and off. Da-
maged switches must be replaced
by our service centre.
Only use splash-proof extension
cables approved for outdoor
use. The strand cross-section of
the extension cable must be at
least 2.5 mm2 for cables up to
25 m and 2.5 mm2 for cables
over 25 m. Always roll out the
cable drum completely before
use. Check the cable for dama-
ge.
Do not use the cable to pull the
plug from the socket. Protect the
cable from heat, oil and sharp
edges.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWH 2800 A1 - IAN 335449 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWH 2800 A1 - IAN 335449 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info