Manual Parkside PWH 2800 A1 - IAN 335449 (page 24 of 128) (English, German, Dutch, French, Polish)

764040

Zoom out

Zoom in

1/128

GB IE

tening material must be checked

for tightness. Covers and pro-

tective shields must be in place

and in good working condition.

Damaged or illegible stickers

must be replaced.

• Use replacement and accessory

parts supplied or recommended

by the manufacturer only. Using

externally produced parts results

in the immediate loss of the war-

ranty claim.

• Do not leave the device unatten-

ded and keep it dry and out of

the reach of children.

• Only connect the device to a

socket with a residual current

device (RCD).

Using the device:

• Before turning on the device,

ensure that the hopper is empty.

• Keep your head, hair and body

away from the hopper.

• Do not reach into the hopper

while the device is in operation.

After switching off, the device

continues to run for a short time.

• Always pay attention to your

balance and make sure you are

standing rmly. Do not bend

forward and never stand higher

than the device when throwing

in material. Ensure secure foo-

ting on slopes.

• Walk at a steady pace, do not

run.

• When feeding in material, en-

sure it contains no hard objects

such as metal, stones, glass or

other foreign bodies.

• Do not use the device in the rain

or in bad weather. Only work in

daylight or where there is suf-

cient illumination.

• If you are tired or lacking in

concentration or have consumed

alcohol or tablets, do not work

with the device. Always have a

break on time. Work using com-

mon sense.

• If the cutting mechanism comes

into contact with a foreign ob-

ject or the machine starts to emit

unusual noises or vibrate, imme-

diately turn off the power source

and wait for the machine to

come to a standstill. Disconnect

the machine from the mains sup-

ply:

- when you are not using the

device or when you are trans-

porting or leaving it unatten-

ded;

- before releasing the blocked

cutting roll;

- when you inspect the device,

clean it or remove blockages;

- when you perform cleaning or

maintenance work, or swap

accessories;

- if the power cable or exten-

sion cable is damaged or

entangled;

- if you want to move or lift the

device;

- if foreign bodies get into the

device, if there are unusual

noises or vibrations (check

the device for damage before

restarting the device).

• Never operate the machine with

defective protective equipment

or shields, or without safety

equipment, e.g. without the col-

lection box being connected.

• Keep the power source free of

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWH 2800 A1 - IAN 335449 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWH 2800 A1 - IAN 335449 Manual

Product: