764040
25
Zoom out
Zoom in
Previous page
1/128
Next page
25
IEGB
potential for re. Remember that
when you launch the starting
mechanism on power tools, the
cutting tool also starts up.
Caution! This is how to avoid
damage to the equipment
and possible personal inju-
ries resulting from this:
Treat your device with care. Cle-
an the ventilation holes regular-
ly and follow the maintenance
instructions.
Do not overload your device.
Only work within the power
range indicated. Do not use
low-performance machines for
heavy work. Do not use the de-
vice for purposes for which it is
not intended.
Only turn off the device once
the hopper is fully emptied
otherwise the device may beco-
me clogged and, under some
circumstances, may not start
again.
Do not try to repair the device
yourself, unless you have pro-
fessional training. All work not
mentioned in these instructions
may only be performed by our
service centre.
Maintenance and storage
a) If you stop the machine for
maintenance, inspection, sto-
rage or to change accessories,
switch off the power source,
disconnect the machine from the
mains supply, and ensure that
all moving parts have come to
a standstill. Allow the machine
refuse or other accumulated
material to prevent it from beco-
ming damaged and to avoid a
potential re.
Stop the machine and remove
the plug from the mains socket.
Ensure that all moving parts are
at a full standstill
- whenever you leave the ma-
chine unattended,
- before removing any obstructi-
on or cleaning blocked chan-
nels,
- before checking, cleaning or
carrying out other work on the
machine.
Ensure that you do not touch
any of the dangerous moving
parts before you have unplug-
ged the machine from the mains
supply, and that the dangerous
moving parts have come to a
complete standstill.
Ensure the material being pro-
cessed does not collect in the
ejection zone; this could prevent
proper ejection and lead to the
material being thrown back out
through the hopper.
Do not transport or tilt the de-
vice when the motor is running.
Hands, other parts of the
body and clothing must not be
brought into the feeding cham-
ber, discharge chute or near
other moving parts.
If there are blockages in the
machine‘s inlet or outlet, switch
off the motor and pull out the
mains plug before removing any
material remaining in the feed
opening or discharge chute.
Ensure the motor is free of was-
te and other deposits to protect
the motor from damage or the
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWH 2800 A1 - IAN 335449 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWH 2800 A1 - IAN 335449 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info