764040

Parkside PWH 2800 A1 - IAN 335449 Manual

28
Zoom out
Zoom in
Previous page
1/128
Next page
28
GB IE
Switching on and off
Make sure that the mains voltage
matches the details on the type pla-
te.
1. Make a loop in the end of
the extension cable and
suspend this in the cable
strain relief (7) on the mains
cable ( 6).
2. Re-connect the extension cable.
3. Make sure that the hopper ( 3) is
empty before switching on.
4.
1
2
To start the device,
slide the rotary
switch ( 2) lock
( 2a) in the direc-
tion .
Turn the rotary switch to the right. The
device is now in continuous operation.
5. Fill the hopper with the material to be
shredded ( 3).
→ The material is drawn in and sh-
redded.
6. To turn off, turn the rotary switch ( 2)
left to the OFF position.
The device will continue to run after
switching off.
Changing the rotational
direction (reverse)
You can change the rotational direction of
the cutting roll (reverse) to remove jammed
material.
1.
1
2
Slide the rotary
switch ( 2) lock
( 2a) in the direc-
tion of the power
cable.
2. Turn the rotary switch to the left. The
device is now in inching mode.
→ jammed shredded material is re-
leased.
3. Change the rotational direction again
to continue shredding (see section
“Operation/switching on and off”).
Emptying the collection box
Empty the collection box regularly.
Be aware that the collection box
lls unevenly under the discharge
chute!
1. Switch off the device and unplug the
mains plug from the socket.
2. Unlock the collection box ( 11) by
moving the safety switch ( 10) to the
“OFF” position.
3. Remove the collection box from the
chassis ( 9) and empty it.
4. Make sure that the area around the sa-
fety switch is free of wood chips before
inserting the collection box again.
5. Put the collection box back in place
and move the safety switch up as far as
it will go.
Overload protection
If the motor is overused, e.g.if the cutting
roll is blocked due to branches that are too
thick, the device switches off automatically.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWH 2800 A1 - IAN 335449 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWH 2800 A1 - IAN 335449 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info