764040

Parkside PWH 2800 A1 - IAN 335449 Manual

30
Zoom out
Zoom in
Previous page
1/128
Next page
30
GB IE
Switch off the device and unplug
the mains plug.
Wear gloves when handling the
cutting roll.
1. Tilt the device backwards by its
wheels and carefully place it on
its back.
2. Unscrew the four hexagon socket
screws (15) from the housing
plate (16).
3. Remove the housing plate (16).
4. Remove the blockage in the de-
vice.
5. When replacing the housing
plate (16), make sure it is positi-
oned correctly. It is xed based
on the blade shaft (17) and the
pressure plate pin (18a).
6. Screw the housing plate (16)
with the four hexagon socket
screws (15).
Adjusting the pressure plate
Running-in a new machine can sometimes
require the pressure plate to be adjusted at
shorter intervals at the beginning.
You can see the right time to adjust the
pressure plate when the shredded material
only appears crushed and is still held to-
gether in one piece.
1. Turn the device on.
2. Slowly turn the adjuster screw ( 8) in
a clockwise direction ( – ) until grinding
noises are audible.
Avoid adjusting the pressure plate
too far and causing unnecessary
wear.
Maintenance and
cleaning
Have any work that is not
described in these instruc-
tions performed by an au-
thorised customer service
centre. Only use original
parts.
Wear gloves when handling the
cutting roll.
Before any maintenance or clea-
ning work, turn off the machine,
unplug the mains plug and wait for
the cutting roll to come to a stand-
still.
General cleaning and
maintenance work
Do not spray down the
shredder with water.
Danger of electric shock!
• Always keep the machine, wheels and
ventilation holes clean. Use a brush or
cloth for cleaning, but do not use any
cleaning agents or solvents.
• Check the machine, especially the
protective equipment, before each use
for damage such as loose, worn or da-
maged parts. Ensure that all nuts, bolts
and screws are rmly in place.
• Check the covers and protective de-
vices for damage and correct t. Repla-
ce these if necessary.
• Store the machine in a dry place out
of reach of children. Do not enclose
the machine in nylon sacks as this may
cause moisture to form.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWH 2800 A1 - IAN 335449 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWH 2800 A1 - IAN 335449 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info