819505

Parkside PMRA 20-Li B2 - IAN 462730 Robot Manual

56
Zoom out
Zoom in
Previous page
1/388
Next page
GB MT
56
The lawn mower is now in standby
mode.
If you have entered the wrong PIN:
Wait about 3 seconds or press the
OK button (7) to be able to enter the PIN
again.
If you enter an incorrect PIN three times in
a row, the screen is locked for 15 seconds.
For each additional incorrect PIN, the
blocking time is doubled.
Switching off the lawn mower
1. Press and hold the START button (3) for
about 3 seconds.
The lawn mower stops if:
- the STOP button (9) is pressed
- the cover (1) is raised
- it loses the boundary wire signal and
does not nd it again within 5 minutes
- it crosses the boundary wire when
mowing.
- it gets stuck between obstacles and
needs more than 10 seconds to nd a
way out.
- it is raised
Mowing
There are two different modes: manual
mowing and scheduled mowing.
In both modes, the mower automati-
cally runs the boundary wire once
after every seventh activated day and
mows this area.
Depending on the nature of the
grass (height, thickness), the robotic
lawn mower adjusts its mowing speed to
ensure a good result.
Manual mowing
Prerequisites for starting “manual
mowing” mode:
- The mower must be in standby mode
to start manual mowing (see sec-
tion “Switching on and off”, section
“Switching on the mower”).
- Starting from the charging station re-
quires a battery capacity of more than
70%. Otherwise, the mower automati-
cally switches to charge mode until the
capacity is more than 90%, then it au-
tomatically leaves the charging station.
- Starting outside the charging station
and inside the boundary wire requires
a battery capacity of more than 30%.
If the battery capacity is less than or
equal to 30%, the mower automatically
returns to the charging station.
1. Open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
3. Press the OK button (7).
4. Press the START button (3) for 1 second
to start manual mowing.
In this mode, the device works as long
as you have set the operating time (see
section “Setting the operating times”) or
until max. 24 hrs. At 24 hrs, the device
automatically returns to the charging sta-
tion and starts the following day according
to schedule if a start time has been pro-
grammed. Otherwise, the device remains
in the charging station.
If the STOP button (9) is pressed in
this mode, the message “Emergency
stop” appears in the display followed by
the message “Continue work?”. Conrm
with the OK button (7) to start manual
mowing again or end manual mowing by
pressing the Back button (5).
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMRA 20-Li B2 - IAN 462730 Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info