819505

Parkside PMRA 20-Li B2 - IAN 462730 Robot Manual

57
Zoom out
Zoom in
Previous page
1/388
Next page
GB MT
57
If a malfunction appears in the dis-
play during manual mowing and
you are able to rectify and acknowledge it,
the mower will start automatically within
30 seconds after closing the cover (1).
Scheduled mowing
Prerequisites for starting “Sched-
uled mowing” mode:
- The mower must be in standby mode
to start automatic mowing (see sec-
tion “Switching on and off”, section
“Switching on the mower”).
- Starting from the charging station
requires a battery capacity of 100%.
Otherwise, the mower automatically
switches to charge mode until the ca-
pacity is 100%, then it automatically
leaves the charging station.
- Starting outside the charging station
and inside the boundary wire requires
a battery capacity of more than 30%.
If the battery capacity is less than or
equal to 30%, the mower automatically
returns to the charging station.
1. Close the cover (1).
The mower starts automatically from
standby at the scheduled time programmed
in the schedule (see section “Setting the op-
erating times”) when the start requirements
are met.
Do not press the START button in addition,
otherwise the mower will operate in manu-
al mode and not on schedule.
If the STOP button (9) is pressed in
this mode, the message “Emergency
stop” appears in the display followed by
the message “Continue work?”. Conrm
with the OK button (7) to start mowing
again or end mowing by pressing the Back
button (5). Mowing will not resume until
the next programmed start time is reached
and the start conditions are met, or when
you start manual mowing.
If a fault is displayed in the mode,
you can rectify and acknowledge it.
The mower starts automatically within 30
seconds after closing the cover (1).
Back to the charging station
When the unit is in standby mode, press
and hold the HOME button (4) for about
3 seconds. The display (10) shows “Close
the cover to start“. Close the cover (1) and
the mower moves to the charging station. It
then begins to charge there.
Settings
(Fig )
The lawn mower has the following setting
options that you can make via the control
panel if you want to change the factory
settings.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMRA 20-Li B2 - IAN 462730 Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info