684713

Parkside PKGA 40-Li A1 - IAN 313870 Manual

55
Zoom out
Zoom in
Previous page
1/310
Next page
55
IEGB
If the thread ends can not be
lengthened:
• Turn off the device.
• Press the core insert as far as it will go
and pull rmly on the end of the string.
If no line ends are visible:
• Replace the spool (see chapter on
‘Replacing the spool’).
Attention! Thread remnants
can be projected and lead to
injuries.
A
Switching on and off
The device has a central on/off
switch (28).
After 2 minutes of non-use, the device
switches off automatically and must
be switched on again via the central
on/off switch (28) before reuse.
As soon as a rechargeable battery
is removed, the device also switches
off automatically.
Ensure your stance is stable and
hold the appliance tightly with both
hands and away from your body.
Before switching the apparatus on,
make sure that it is not touching
any objects.
1. Turn the device on using the on/off
switch (28). The charge status indicator
(27) lights up as long as the device is
switched on.
2. To start, press and hold the safety
switch (29) while pressing the start
switch (30). The hedge trimmer runs at
top speed. You can release the safety
switch (29) again.
3. To switch it off, release the start switch
(30).
4. Turn the device off using the on/off
switch (28).
Working with the hedge
trimmer
While cutting, make sure that you
do not touch any objects, such as
wire fences or plant supports. This
can cause damage to the cutter bar.
• To avoid eye injuries, always wear
safety goggles while working with the
hedge trimmer.
• Always hold the device tightly with
both hands, with one hand on the rear
handle and the other hand on the front
round handle (
A
5).
Your thumb and ngers must tightly
clasp the handles.
• Check the carrying harness (
A
19) for
comfortable positioning which facilita-
tes holding the hedge trimmer.
• If the blades become jammed with
solid objects, switch the device off
immediately, pull the mains plug, and
remove the object.
• Avoid over-stressing the device while
working.
Working with the pole-
mounted pruner
If the saw chain gets stuck,
do not attempt to pull out the
pruner with force. There is a
risk of injury. Turn the motor
off and use a lever arm or
wedge to release the pruner.
• You will have better control over the
device if you saw using the lower edge
of the blade bar (saw chain in pulling
direction) and not using the upper edge
… 55 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pkga-40-li-a1---ian-313870

Reset search

  • Bonjour. Je recherche un arbre de transmission de 64 cm de long et de 5 MM de diametre avec les.bout carré sur 2 cm de long pour une perche multifonction tailles haies électriques parkside Submitted on 3-8-2022 at 21:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKGA 40-Li A1 - IAN 313870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 40-Li A1 - IAN 313870 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info