684713

Parkside PKGA 40-Li A1 - IAN 313870 Manual

53
Zoom out
Zoom in
Previous page
1/310
Next page
53
IEGB
4. The safety blade beam can now be
swivelled out. Use the stop stages and
allow the stop lever (45) to click back
in. You can choose 12 stop stages.
5. Then, release the safety lever (44)
again and ensure that it latches back
into its initial position.
Pivoting the pole-
mounted pruner
1. Pull the lock (46) outward and turn it
90°.
2. Hold the pole-mounted pruner at the
protective transport (9) and turn it to
the desired position.
There are ve possible positions.
3. Fix the pole-mounted pruner by pulling
the lock (46) outward and turning it
90° back to the original position.
Putting on the carrying
harness
The body protection (20) on
the carrying harness must
be placed between the body
and the device.
Always wear the carrying
harness when working with
the 3-tooth blade! Always
turn the device off before
taking off the carrying har-
ness. Accident hazard.
Generally, we recommend using the
carrying harness whenever using
the device.
The carrying harness is
equipped with a quick-relea-
se device. Pulling the tab (47)
releases the device quickly
from the carrying harness in
a dangerous situation.
1. Wear the carrying harness (19) like a
backpack. The clip must be situated on
the chest.
2. Adjust the strap length so that the body
protection (20) is level with the hip.
3. Attach the snap hook to the eyelet (6)
on the tube shaft of the device.
Place the body protection (20) on
your hip between your body and
the device.
While wearing the carrying harness,
ensure that the pad is placed on your
shoulders to increase comfort.
Sliding the carrying eye
Select the appropriate position for the
carrying harness eyelet according to
whether you are using a spool/3-toothed
blade or pruner/hedge trimmer.
You can slide the carrying eye (
A
6) to
better distribute the weight of the device.
1. Loosen the screw (48) on the eyelet
(6) for the carrying harness, using the
hexagon socket wrench (21) from the
storage (
A
31).
2. Slide the eyelet (6) to the appropriate
position.
3. Tighten the screw (48) again.
For the trimmer/3-tooth blade operation:
Without touching it by hand, the device
attached to the harness should
allow the spool to rest lightly on the
ground
balance the blade approximately 20
cm above the ground.
… 53 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pkga-40-li-a1---ian-313870

Reset search

  • Bonjour. Je recherche un arbre de transmission de 64 cm de long et de 5 MM de diametre avec les.bout carré sur 2 cm de long pour une perche multifonction tailles haies électriques parkside Submitted on 3-8-2022 at 21:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKGA 40-Li A1 - IAN 313870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 40-Li A1 - IAN 313870 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info