Manual Parkside PKGA 40-Li A1 - IAN 313870 (page 56 of 310) (English, German, Dutch, French, Polish)

684713

Zoom out

Zoom in

1/310

GB IE

of the blade bar (saw chain in pushing

direction).

• The saw chain must not touch the

ground or any object while sawing

through the material or thereafter.

• Ensure that the saw chain does not get

stuck while sawing. The log must not

break or splinter.

• Please also observe the precautionary

measures to protect against kickback

(see the safety information).

• Remove branches hanging downwards

by sawing from the top of the branch.

• Twisted branches must be individually

cut down to size.

Working using the thread

spool

• In small grass areas hold the device at

an angle of about 30° and swing the

cutting head evenly to the right and

left with a semi-circular movement.

• The best results are obtained with a

maximum grass length of 15 cm. If the

grass is taller, it is recommended to

mow several times.

• To cut around trees, fence posts or

other obstacles, slowly move the de-

vice around the obstacle and cut with

the thread ends.

• Avoid any contact with xed obstacles

(rocks, walls, picket fences, etc.). The

thread would wear out quickly. Use the

edge of the protective cover to keep

the device at the correct distance.

Attention! Do not lay the

cutting head on the ground

during operation!

Working with the 3-tooth

blade

Always wear the harness

and suitable protection clo-

thing when working with the

device. Wear eye, hearing

and head protection.

Ensure that the blade is in-

stalled correctly. Replace da-

maged or blunt tool parts.

There is a risk of injury.

Only use the blade to work on

open, even areas. Carefully inspect

the area to be cut and remove all

foreign bodies. Avoid hitting sto-

nes, metal or other obstacles. The

blade can be damaged and there

is a risk of kickback by the machi-

ne.

• When working, hold the cutter above

the ground and slowly swivel the de-

vice back and forth like a scythe in an

equal arch.

• Do not hold the cutting head at an

angle.

• Do not use the device to cut wild

growth or brushwood.

• Regularly check the blades for damage

and replace as needed.

Putting down the device

• Place the device on the ground with the

motor housing rst.

• The cutting unit (

1/11/12/17) must

be placed on the ground without being

subjected to any pressure.

• Do not apply any static pressure

whatsoever to the cutting

unit (

1/11/12/17).

Bonjour. Je recherche un arbre de transmission de 64 cm de long et de 5 MM de diametre avec les.bout carré sur 2 cm de long pour une perche multifonction tailles haies électriques parkside Submitted on 3-8-2022 at 21:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 40-Li A1 - IAN 313870 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKGA 40-Li A1 - IAN 313870 Manual

Product: