Manual Parkside PKGA 40-Li A1 - IAN 313870 (page 49 of 310) (English, German, Dutch, French, Polish)

684713

Zoom out

Zoom in

1/310

IEGB

c) Use the machine only in daylight or

with good articial lighting.

d) Never use the machine if the cover or

guard is damaged, or without a cover

or guard.

e) Only switch on the motor when your

hands and feet are out of the range of

the cutting unit.

f) Always disconnect the machine from

the power supply (i.e. remove the re-

movable battery)

1) whenever leaving the machine unatten-

ded,

2) before removing blockages,

3) before checking, cleaning or mo-

difying the machine,

4) after contact with a foreign object,

5) if the machine begins to vibrate in an

unusual way.

g) Be careful to avoid injuries to your feet

and hands by the cutting unit.

h) Make sure to keep the ventilation

openings free of foreign objects.

i) Never replace a non-metallic cutting

unit with a metallic cutting unit.

j) Avoid an abnormal body posture,

keep your balance at all times and en-

sure secure footing on slopes.

Walk when holding the device in your

hand. Do not run!

k) Never operate the machine with defec-

tive guards or covers or without protec-

tion or without guards.

Maintenance and storage

a) Always disconnect the machine from

the power supply (i.e. remove the re-

movable battery) before performing

maintenance or cleaning.

b) Only use spare and accessory parts

recommended by the manufacturer.

c) Regularly inspect and maintain the

machine. Only have maintenance per-

formed by a contract workshop.

d) When the machine is not being used,

store it out of the reach of children.

Brush cutter - kickback

causes and how to avoid

them with a 3-tooth blade

In the event of a kickback, the

operator will feel a powerful

blow from the combination

machine. This may lead to lo-

sing control of the device and

serious injury. You can avoid

kickbacks through caution

and proper technique.

While working with the 3- tooth blade the-

re is a risk of kickback if the blade edge

hits an obstacle (stone, wood).

• Hold the device with both hands.

• Make sure there are no obstacles on the

ground and do not

use the 3-tooth blade

near fences, metal

posts or similar. Use

only properly sharpe-

ned tools. To cut thick

stems, switch the device to position A.

Additional safety

instructions

• If possible, connect the device only to

a socket with a residual current device

(RCD) with a tripping current of not

more than 30 mA.

• If replacement of the connecting cable

becomes necessary, this is to be carri-

ed out by the manufacturer or its agent

in order to avoid safety risks.

• Hold the electric tool only by the in-

sulated gripping surfaces, as the saw

chain may come into contact with con-

Bonjour. Je recherche un arbre de transmission de 64 cm de long et de 5 MM de diametre avec les.bout carré sur 2 cm de long pour une perche multifonction tailles haies électriques parkside Submitted on 3-8-2022 at 21:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 40-Li A1 - IAN 313870 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKGA 40-Li A1 - IAN 313870 Manual

Product: