684713

Parkside PKGA 40-Li A1 - IAN 313870 Manual

47
Zoom out
Zoom in
Previous page
1/310
Next page
47
IEGB
handle and left hand on the
front handle. Holding the chainsaw
the other way around increases the
risk of injuries and is not permitted.
• Wear protective goggles and
hearing protection. Further
protective equipment for the
head, hands, legs and feet is
required. Appropriate protective
clothing reduces the risk of injury from
ying chip material and accidental
contact with the saw chain.
• Do not use the chainsaw to
work on trees. Operating a chain-
saw on a tree poses the risk of injury.
• Ensure you are standing rmly
and only use the chainsaw
if the ground beneath you is
solid, secure and even. Slippery
ground or unstable surfaces such as on
a ladder can lead to loss of balance
or loss of control over the chainsaw.
• If working on a branch under
tension, be aware that it will
spring back. Once the tension in the
wood bres has been released, the
branch may hit the user and/or control
over the chainsaw may be lost.
• Be particularly careful when
cutting brushwood and young
trees. The thin material may become
caught in the saw chain and hit you or
cause you to lose balance.
• Carry the chainsaw by the front
handle when it is switched off
with the saw chain pointing
away from your body. Always
place the protective cover onto
the chainsaw when transport-
ing or storing it. Careful handling
of the chainsaw reduces the probabili-
ty of accidentally coming into contact
with the running saw chain.
• Observe the instructions for lu-
brication, chain tensioning and
replacing accessories. An impro-
perly tensioned or lubricated chain
may rip apart or increase the risk of
kickback.
• Keep handles dry, clean and
free from oil and grease. Greasy,
oily handles are slippery and lead to
loss of control.
• Only saw wood. Do not use the
chainsaw for unintended ap-
plications - example: do not use
the chainsaw to saw through
plastic, masonry or construction
materials not made from wood.
Use of the chainsaw for unintended
applications can lead to hazardous
situations.
Kickback causes and how
to avoid them with pole-
mounted pruners
Caution - kickbacks! Be aware that
you may experience kickback while
working with the device. There is a
risk of injury. Kickbacks can be avo-
ided through taking the appropriate
care and using the correct sawing
technique.
b
a
Bild 1
• Kickbacks may occur if the tip of the
guide rail touches an object, or if the
wood bends and the saw chain gets
caught in the cut (see Fig. b).
… 47 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pkga-40-li-a1---ian-313870

Reset search

  • Bonjour. Je recherche un arbre de transmission de 64 cm de long et de 5 MM de diametre avec les.bout carré sur 2 cm de long pour une perche multifonction tailles haies électriques parkside Submitted on 3-8-2022 at 21:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKGA 40-Li A1 - IAN 313870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 40-Li A1 - IAN 313870 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info