Manual Parkside PKGA 40-Li A1 - IAN 313870 (page 50 of 310) (English, German, Dutch, French, Polish)

684713

Zoom out

Zoom in

1/310

GB IE

cealed power lines. Contact with a live

wire can also cause a charge in metal

parts of the appliance and result in an

electric shock.

• Carefully inspect the surface to be cut,

and remove all wires and other foreign

bodies.

• Check the appliance before each use

for obvious defects such as loose,

worn or damaged parts. Check the

appliance for signicant damage or

defects if it is dropped.

Attention! Observe the

safety and operating infor-

mation in the operating in-

structions for your Parkside

X 20 V Team series rechar-

geable battery.

Assembly

Remove the battery from the

device before carrying out

any work on the device.

Only use original parts.

The device can be used with either

the hedge trimmer, pole-mounted

pruner or trimmer attachment, eit-

her with spool or 3-tooth blade.

Dismantling is carried out in reverse

order.

Remove/insert battery

1. To remove the battery (25) from the

device, press the release button on the

battery and pull the battery out.

2. To insert the battery (25), push the

battery along the guide rail into the

device. You will hear it click into place.

Only insert the rechargeable

batteries once the device is

completely assembled. Risk

of injury!

Mounting the tubular

shaft

Before mounting, remove the pro-

tective cap(s) from the front tubular

shaft (2).

1. Loosen the buttery screw (3).

2. Pull the lock (8) outward and turn it left

or right as far as it goes.

3. Slide the front tubular shaft (2) onto the

tubular shaft on the device housing (4).

4. Pull the lock (8) outward and turn it

back to its original position.

5. Turn the front tubular shaft (2) with a

gentle rotating movement until the lock

(8) clicks into place in the bore on the

front tubular shaft (2).

6. Fix the tubular shaft in place with the

buttery screw (3).

 Onlytightenthebuttery

screw(3)nger-tight.The

use of maximum manual

force will damage the tubu-

lar shaft.

Mounting the round

handle

The round handle must be

mounted with a spacing of

at least 25 cm to the device

handle!

The leg protection must al-

ways be mounted on the

operator side!

Bonjour. Je recherche un arbre de transmission de 64 cm de long et de 5 MM de diametre avec les.bout carré sur 2 cm de long pour une perche multifonction tailles haies électriques parkside Submitted on 3-8-2022 at 21:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 40-Li A1 - IAN 313870 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKGA 40-Li A1 - IAN 313870 Manual

Product: