Manual Parkside PHDP 180 B2 - IAN 373334 (page 28 of 158) (English, German, Dutch, Danish, French, Polish, Spanish)

796055

Zoom out

Zoom in

1/158

Select the attachment

3-in-1 nozzle (23)

You can choose from 3 nozzles by rotating the

tip. A symbol on the lance extension shows the

nozzle which is selected.

Spot jet

Flat spray (30°)

Foam nozzle for cleaning agent

Turbo dirt blaster (22)

The rotating water jet is suitable for

working with low water consumption.

Surface cleaner (24)

Notes

• Only use the surface cleaner on solid sur-

faces.

• Never raise the surface cleaner while the

pressure jet is active.

Properties

• Splash-free high-pressure cleaning of floor

and wall surfaces

• High degree of cleaning through rotating

nozzles

• Pressure regulator

Control elements

• Pressure regulator (25)

Higher pressure, spray arms rotate faster

Lower pressure, spray arms rotate slower

Fitting and removing

attachments

Fitting the nozzle

1. Fit the lance (4) on the trigger gun (1) (Bay-

onet locking device: plug and turn).

2. Pull and hold the quick connector ring (21)

on the lance (4).

3. Fit the attachment on the lance (4).

4. Release the quick connector ring (21).

The attachment clicks into place.

Removing the nozzle

1. Pull and hold the quick connector ring (21)

on the lance (4).

2. Pull the attachment off the lance (4).

3. Release the quick connector ring (21).

4. Remove the lance (4) from the trigger gun

(1) (Bayonet locking device: turn and pull).

Mounting the surface cleaner (24)

1. Remove the lance (4) from the trigger gun

(1) (Bayonet locking device: turn and pull).

2. Optional: Fit the extension tube (7) on the

pivotable connection (26) of the surface

cleaner (Bayonet locking device: plug and

turn).

3. Fit the extension tube (the pivotable connec-

tion of the surface cleaner) on the trigger

gun (1).

4. Secure the pivotable connection and the

extension tube with the coupling nuts. The

Bayonet locking devices must not be able to

be opened.

Removing the surface cleaner (24)

1. Loosen the coupling nuts on the pivotable

connection (26) and the extension tube (7).

2. Remove the extension tube (the connection

of the surface cleaner) from the trigger gun

(1) (Bayonet locking device: turn and pull).

3. Remove the extension tube from the pivot-

able connection (26) (Bayonet locking

device: turn and pull).

Operation

Cleaning using cleaning

agent

Requirements for the cleaning agent

• This device has been designed to be used

with a neutral cleaning agent based on bio-

degradable anionic surfactants.

• Use of other cleaning agents or chemic-

als can negatively impact the safety of the

device and can cause damage. Such dam-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHDP 180 B2 - IAN 373334 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHDP 180 B2 - IAN 373334 Manual

Product: