Manual Parkside PHDP 180 B2 - IAN 373334 (page 29 of 158) (English, German, Dutch, Danish, French, Polish, Spanish)

796055

Zoom out

Zoom in

1/158

age to the device is not covered by the war-

ranty.

• You can buy cleaning agents from our on-

line shop.

Requirements

• The cleaning agent tank is filled with clean-

ing agent.

• 3-in-1 nozzle is at the position foam nozzle

for cleaning agent.

• The rotatable pressure setting (20) on the

trigger gun (1) is at the position high pres-

sure for walls and foam, the LC display

(15) shows .

Filling and emptying the cleaning

agent tank

1. Remove the sealing cap with suction hose

(12) from the cleaning agent tank (13).

2. Pull the cleaning agent tank up and then

away from the device.

 The cleaning agent tank is removed and

can be filled or emptied.

3. Insert the cleaning agent tank in reverse or-

der.

4. Seal the cleaning agent tank with the seal-

ing cap.

5. Push the suction hose into the cleaning

agent tank until it reaches the bottom.

Switching on

WARNING!A leaky water system can

result in electric shock! Move the On/Off

switch (32) to the position “0” (OFF). Pull out

the plug. Try connecting the water again (see

Establishing a water supply, p.27).

WARNING!The device may only be used

in an upright position! There is a risk of an elec-

tric shock if the device falls over. Move the

On/Off switch (32) to the position “0” (OFF).

Pull out the plug. Only now may you bring the

device into the upright position. For your own

safety, wait about five minutes until you restore

the electrical connection.

WARNING!Unsuitable extension cables

can be dangerous! Use only extension cables

that are designed for outdoor use. The connec-

tion must be dry and routed above the ground.

We recommend using a cable drum that holds

the socket at least 60mm above the ground.

1. Ensure that the On/Off switch (32) is in the

“0” (OFF) position.

2. Put the device in an upright position.

3. Insert the mains plug into an earthed socket

with residual current circuitry.

The right part of the holder for the mains

connection cable (11) as seen from behind

is rotatable. This allows you to easily re-

move the mains connection cable (10).

4. NOTICE!Dry running will damage the

device. Do not operate the pressure washer

with the tap turned off.

Turn the tap on fully.

5. Move the On/Off switch (32) to the posi-

tion “I” (ON).

The motor switches on briefly until the

necessary pressure has built up. The motor

then stops.

6. WARNING!Be aware of the recoil

force when the water jet commences. There

is a risk of injuring yourself or other people.

Ensure that your footing is secure. Keep a

good hold on the trigger gun (1).

Press the switch lever (17) on the trigger

gun (1).

The nozzle starts working at pressure

and the motor starts. If you release the

switch lever (17), the motor stops. The high

pressure is maintained in the system.

Interrupting the operation

You can insert the trigger gun (1) with lance

and nozzle into the holder for the trigger gun

(31).

1. Release the switch lever (17) on the trigger

gun (1).

2. If you put down the trigger gun: Lock the

switch lever using the child safety lock (18)

(seen from behind).

 The switch lever is locked .

You can pull the switch lever .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHDP 180 B2 - IAN 373334 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHDP 180 B2 - IAN 373334 Manual

Product: