796055

Parkside PHDP 180 B2 - IAN 373334 Manual

27
Zoom out
Zoom in
Previous page
1/158
Next page
27
3. Insert the high-pressure hose into the high-
pressure connection on the trigger gun (1).
Do not guide the hose through the bow-
type handle (2) as to not obstruct the bow-
type handle.
Establishing a water supply
You have two options to supply the device with
water:
• Household water connection
• Suctioning standing, clean water, e.g. rain
barrel
Household water connection
Requirements
• Supply hose: Garden hose with fitted
garden hose adaptor (34); 13mm (½");
length between 5m and 30m
• Minimum pump capacity: 540l/h (9l/min)
• System separator
A system separator (check valve) prevents
the backflow of water and cleaning agent
into the drinking water pipeline.
• According to current regulations, a pres-
sure washer must never be connected
to the drinking water network without a
system separator. A suitable system sep-
arator must be used in accordance with
EN12729 Type BA.
• Water that has flowed through a system
separator is classified as non-potable.
• System separators are available from
specialist dealers.
Procedure
1. Insert the filter insert (30) in the water con-
nection (28).
2. Mount the quick connector for the garden
hose (29) on the water connection.
3. Mount the garden hose adaptor (34) on
the supply hose.
• Remove the grooved clamping nut.
• Push the clamping nut over the end of
the hose.
• Insert the end of the hose into the thread
of the garden hose adaptor.
• Fix the garden hose adaptor with the
clamping nut.
• Check whether the garden hose adaptor
is mounted securely to the garden hose.
4. Connect the supply hose to the water sup-
ply.
5. Bleed the supply hose: Open the water sup-
ply until the water flows bubble-free out of
the other end of the supply hose. Close the
water supply.
6. Connect the garden hose adaptor (34) on
the supply hose to the quick connector for
the garden hose (29).
Suctioning water
Requirements
• NOTICE!Contamination from backwashed
cleaning agent! Do not draw in any water
from natural accumulations.
• Suction hose with filter basket (not in-
cluded )
• standing, clean water, e.g. rain barrel
• Max. suction height: 0.5m
Procedure
WARNING!Electric shock! The device it-
self must not be submerged in the water collect-
or.
NOTICE!Damage due to dry running! Ensure
there is a sufficient and reliable water supply.
1. Connect the suction hose with filter basket
to the quick connector with filter insert (29)
on the water connection (28) of the device.
2. Insert the end with the filter basket into the
water collector.
3. Remove the lance (4) from the trigger gun
(1).
4. Press and hold the switch lever (17).
5. Move the On/Off switch (32) to the posi-
tion “I” (ON).
The device begins to suction water and air
can escape.
6. Once the device is free of air, you can re-
lease the switch lever.
7. Fit an attachment.
GB
IE
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHDP 180 B2 - IAN 373334 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHDP 180 B2 - IAN 373334 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info