796055
26
Zoom out
Zoom in
Previous page
1/158
Next page
26
of running water for at least 15 minutes.
Call a doctor if irritation, injury or pain per-
sists.
After breathing it in: Get some fresh
air if you notice your respiratory tract is irrit-
ated. Call a doctor if irritation persists.
After swallowing: Do not force vomit-
ing. If the affected person is conscious,
make sure that they rinse their mouth and
the surrounding areas of skin with water for
at least 15 minutes. Consult a doctor right
away. Call a doctor right away.
Preparation
WARNING!Risk of injury due to uninten-
tional start-up. Do not insert the plug into the
socket until the device is fully prepared for use.
Operating elements and how
they work
Familiarise yourself with the operating elements
before using the device for the first time.
Trigger gun (1)
Switch lever (17)
Pulling the switch lever: Activates the
pressure jet
Releasing the switch lever: Deactivates
the pressure jet
Switch lever child safety lock (18)
(seen from behind)
The switch lever is locked .
You can pull the switch lever .
WARNING!Risk of injury due to pres-
sure jet! Lock the switch lever every time you
take a break.
Pressure setting (20)
The trigger gun pipe can be turned through
three levels.
low pressure
high pressure
LC display (15)
The display shows the set pressure when the
switch lever is pulled.
high pressure for walls and foam
medium pressure for vehicles
low pressure for sensitive objects
Bow-type handle (2)
With the bow-type handle pulled out, you can
conveniently roll the device.
Pulling out the handle:
Pull the bow-type handle up.
Pulling in the handle:
Press the release (3) on the bow-type
handle and pull the bow-type handle down.
Inserting the batteries
Insert the batteries in the battery compartment
before using the device for the first time.
Tools required
Cruciform screwdriver (not included)
Procedure
1. Remove the screw from the battery compart-
ment cover (16).
2. Remove the cover of the battery compart-
ment.
3. Insert the batteries (35) in the battery com-
partment. Pay attention to the correct polar-
ity when inserting the batteries in the battery
compartment.
4. Press the switch lever (17) on the trigger
gun (1).
The LC display shows the selected pres-
sure. If the LC display is not displaying any-
thing, check the direction of the batteries.
5. Insert the cover of the battery compartment.
6. Fasten the cover of the battery compart-
ment using the screw.
Setting up the device
1. Place the device horizontally on a level sur-
face.
2. Insert the high-pressure hose through the
guide for the high-pressure hose (9).
GB
IE
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHDP 180 B2 - IAN 373334 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHDP 180 B2 - IAN 373334 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info