595309
10
Zoom out
Zoom in
Previous page
1/76
Next page
7
PDEXS 150 B2
GB
IE
WARNING!
Never operate the compressed air-powered
random orbital sander without the protective
cuff
.
Never operate the compressed air-powered
random orbital sander with an inverted
protective cuff .
A damaged protective cuff should be
replaced immediately.
Turn the spindle lock with the knurled bulge
towards the flat side of the eccentric spindle
(see Fig. 2).
Fig. 2
Remove the protective cap from the threaded
rod of the grinding disc
and screw it clock-
wise into the eccentric spindle as far as the
stop.
Undo the spindle lock
so that the eccentric
spindle
can turn freely on its own axis.
CAUTION!
Never operate the compressed air-powered
random orbital sander with a locked drive
spindle. This is dangerous and can result in
serious injuries.
Selecting a sandpaper disc
Erosion and surface:
The material removal rate and surface quality are
determined by the grain strength of the sandpaper.
Please note that you can use sandpapers with
various grain sizes for working the different
materials.
Fitting the sandpaper disc
CAUTION!
Ensure that the appliance is disconnected from
the compressed air source before you fit or
remove a sandpaper disc
.
The grinding disc
and the supplied sandpaper
discs are equipped with matching Velcro
fasteners.
Select the sandpaper disc
with the desired
grain and press it onto the grinding disc .
Ensure that it is centred.
To change the sandpaper disc
, lift it from the
side and pull it off the grinding disc .
Clean the grinding disc as required with
compressed air.
Lubrication
NOTE
To avoid friction and corrosion damage,
regular lubrication is particularly important.
We recommend using a suitable special oil
for compressed air appliances (e.g. Liqui
Moly compressor oil).
Lubrication with mist oiler:
A mist oiler (not supplied) continuously
and optimally lubricates the appliance as
a preparation stage after the pressure re-
ducer. A mist oiler gives off fine drops of
oil into the air flow and thus guarantees
a regular lubrication.
Manual lubrication:
If you do not have a mist oiler, lubricate
the appliance before every use or longer
work sessions by dripping 3–4 drops of
special oil for compressed air appliances
into the connector nipple
.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDEXS 150 B2 - IAN 110141 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDEXS 150 B2 - IAN 110141 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info