Manual Parkside PDEXS 150 B2 - IAN 110141 (page 9 of 76) (English, German, Dutch, French, Swedish, Finnish)

595309

Zoom out

Zoom in

1/76

PDEXS 150 B2

■ If universal rotary joints (claw couplings) are

used, locking pins must be used to provide pro-

tection; Whipchek

air hose restraints must be

used to provide protection in case of a failure

of the connection of the hose to the machine.

■ Ensure that the maximum permissible pressure

stated on the machine is not exceeded.

■ Never carry compressed-air-powered machines

by the hose.

Special safety instructions

■ Always wear eye protection when using

or maintaining the sander.

■ Always wear suitable protective clothing.

Protect your hands, hair and clothes from being

drawn in by rotating parts.

■

Always wear a dust mask in situations in

which large amounts of dust are being

generated.

■ Always wear hearing protection.

■

Always wear protective gloves.

■ Only connect the sander to the compressed air

network when it is switched oﬀ.

■ Sparks are created during grinding. Ensure that

nobody can be endangered by ﬂying sparks.

You should also remove any ﬂammable materials

or objects.

■ Do not carry the grinder if it has been connected

to the compressed air hose.

■ Be aware of the danger caused by a ﬂailing

compressed air hose!

■ The grinder is not approved for use with cutting discs!

■ The ﬂow pressure of 6.3 bar may not be

exceeded during operation.

■ Never use oxygen or other ﬂammable gases as

an energy source.

■ Switch the appliance on before applying it to the

workpiece. After completing the task, lift the ap-

pliance from the workpiece and then switch it oﬀ.

■ Once you have completed your work, switch

the grinder oﬀ and place it down securely once

it has come to a standstill.

Caution! Grinder continues to run.

■ Once you have completed your work, disconnect

the grinder from the compressed air supply.

■ Be aware that when processing certain materials

there is a danger that dust and vapours can arise

that could create an explosive atmosphere.

Use vacuum cleaners and suitable protective

equipment.

Before initial operation

NOTE

► The grinder may only be operated on cleaned,

oil-atomised compressed air and may not

exceed the maximum operating pressure of

6.3 bar at the appliance. The compressor

must be ﬁtted with a pressure reducer to

regulate the working pressure.

► Wind the Teﬂon tape

supplied around all

threaded connectors.

Fitting the connector nipple

♦ Remove the plastic protective cap from the

appliance’s air inlet.

♦ Wrap the threads on the connector nipple

with the Teﬂon tape supplied.

♦ Screw the connector nipple

into the air inlet.

Fitting the grinding disc

The compressed air-powered random orbital

sander is equipped with a protective cuﬀ .

■

Rotation direction indicator of the

grinding disc .

♦ To ﬁt or replace the grinding disc

invert the

protective cuﬀ (see Fig. 1).

Fig. 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDEXS 150 B2 - IAN 110141 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDEXS 150 B2 - IAN 110141 Manual

Product: