786093
33
Zoom out
Zoom in
Previous page
1/200
Next page
33
GB IE
Operation
Some level of noise emission with
this equipment is unavoidable. Post-
pone noisy work until designated
periods when it is permitted. Take
rest periods when needed and limit
working time to the minimum neces-
sary. For your personal protection
and the protection of people work-
ing nearby a suitable form of hear-
ing protection must be worn.
Starting/stopping
theengine
Warning! Petrol is fl amma-
ble. Start the engine at least
3 m away from where you
refuelled. Possible fi re haz-
ard.
Place the device on a solid, even
base, avoiding high grass if possi-
ble. Make sure that the cutting tool
does not touch either other objects
or the ground.
For your safety: Stand behind the
device when starting it.
Regularly check the petrol and oil
levels (see “Checking the oil level”)
and top up promptly.
Cold start:
1. Press the petrol pump (30)
(primer) 3x.
2. Pull the safety bracket (2) towards the
handlebar (1) and hold it.
3. Pull the starter handle (6).
4. If the motor starts, slowly release the
starter handle into the starter cable
guide (24).
3
For a warm start it is not neces-
sary to press the primer (30).
If the primer is pressed too often,
too much petrol will enter the car-
burettor and the motor is diffi cult to
start.
Stopping the engine:
Release the safety bracket (2). The
engine switches off and the blade is
braked.
Blade stopping device:
Regularly examine the blade stopping
device:
Release the safety bracket (2). The
engine switches off and the blade is
braked.
The blade must stop within 7 seconds.
Mowing
1. Start the engine (see “Starting/stop-
ping the engine”).
2. Hold the handlebar (1) and the safety
bracket (2) with both hands while mow-
ing.
Working instructions
General working instructions
If possible, mow dry grass to go gentle
on the sod.
Adjust the cutting height so that the de-
vice is not overloaded.
Move the device at walking speed and
in lines as straight as possible. For a
awless mowing result, the lines should
always overlap by a few centimetres.
Do not move backwards.
Always move across the slope when
working on hills.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBM 42 A1 - IAN 373349 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBM 42 A1 - IAN 373349 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info