764032

Parkside PABSP 20-Li B2 - IAN 322691 Manual

36
Zoom out
Zoom in
Previous page
1/132
Next page
35 GB/IE
2nd gear:
Suitable for: Drilling
Speed: High
Torque: Low
Setting the rotating direction
m ATTENTION! RISK OF PRODUCT
DAMAGE!
Do not operate the rotation direction
switch 5 until the product has come to
a standstill.
¾Change the direction of rotation by pressing
the rotation direction switch 5 towards the
left or right (fig. G).
¾When the rotation direction switch 5 is in
the middle position, the on/off switch 6 is
locked.
Torque control
This product is equipped with a torque control that
disengages the spindle when a predefined torque
is exceeded.
¾The torque can be adjusted by turning the
torque sleeve 3 (fig. H).
¾Small screws or soft materials: Select a low
level.
¾Large screws, hard materials or removing
screws: Select a high level.
¾For drilling operation: Turn the torque sleeve
3 to the position.
Switching on and off
NOTE
The on/off switch 6 cannot be locked.
¾Switching on: Press and hold the on/off
switch 6.
Regulate the speed as required (see “Speed
control”) (fig. I).
¾Switching off: Release the on/off switch
6.
Speed control
¾By using the on/off switch 6, you can
progressively control the speed:
Pressure Speed
Gentle pressure: Lower speed
Greater pressure: Higher speed
LED work light
This product is equipped with a LED work light
11
to illuminate the immediate working area to
improve visibility in poorly lit areas.
¾The LED work light
11
lights up automatically
as soon as the product is switched on.
NOTE
uThe LED work light
11
stays on for an
additional approx. 10 seconds after
switching off the product.
Trial run
NOTE
uAlways carry out a no-load trial run before
starting work and after every accessory
tool replacement. Switch the product off
immediately if the accessory tool is not
running smoothly, if considerable vibration
occurs or if you hear abnormal noises.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PABSP 20-Li B2 - IAN 322691 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABSP 20-Li B2 - IAN 322691 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info