764032

Parkside PABSP 20-Li B2 - IAN 322691 Manual

35
Zoom out
Zoom in
Previous page
1/132
Next page
34 GB/IE
Attaching/removing the
accessory tool
m CAUTION! RISK OF INJURY!
Accessory tools can be sharp and
may become hot during use. Always
wear protective gloves when handling
accessory tools!
m WARNING!
Always switch the product off, remove
the battery pack
10
and let the
product cool down before making any
adjustments!
m CAUTION! RISK OF INJURY!
uKeep your hands away from the accessory
tool when the product is in operation.
m CAUTION! RISK OF INJURY!
uAfter the product has been switched off,
the accessory tool continues moving for
some time. Do not touch the accessory tool
and do not attempt to brake it.
This product is equipped with an automatic
spindle lock to open or close the chuck 1 with
the chuck sleeve 2.
¾Open the chuck 1: Turn the chuck sleeve
2 in a counter-clockwise direction (Fig. E).
¾Insert a suitable accessory tool into the chuck
1 as deep as required.
¾Close the chuck 1: Hold the accessory tool
in position. Turn the chuck sleeve 2 in a
clockwise direction.
NOTES
uThis product is equipped with a Röhm drill
chuck with an anti-lock function.
uIf you attempt to open the fully opened
chuck 1 further, the anti-lock function will
be activated to protect the chuck.
uWhen the anti-lock function is activated,
the chuck 1 cannot be closed by turning
the chuck sleeve 2 in a clockwise
direction. A ratcheting sound will be
produced when you attempt to close the
chuck.
uDeactivating the chuck’s 1 anti-lock
function: Turn the chuck sleeve 2 in a
clockwise direction by a certain extent.
Then, turn the chuck sleeve suddenly and
quickly in a counter-clockwise direction.
Repeat this action if the anti-lock function
is still active. When the anti-lock function is
deactivated, you should be able to close
the chuck 1 without ratcheting sounds.
Gear selection
m ATTENTION! RISK OF PRODUCT
DAMAGE!
Do not operate the gear selector
4 until the product has come to a
standstill.
¾Change the gear by sliding the gear selector
4 forwards or backwards (fig. F).
1st gear:
Suitable for: Screwing
Speed: Low
Torque: High
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PABSP 20-Li B2 - IAN 322691 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABSP 20-Li B2 - IAN 322691 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info