764032

Parkside PABSP 20-Li B2 - IAN 322691 Manual

34
Zoom out
Zoom in
Previous page
1/132
Next page
33 GB/IE
Belt clip
(Fig. J)
The belt clip 9 is not assembled upon delivery.
The belt clip can be mounted on either side of a
belt (required tool: Cross tip screwdriver).
¾Loosen the belt clip’s 9 screw.
¾Insert the belt clip 9 on either side of the
product. Tighten the screw.
Operation
Attaching/removing the
battery pack
m CAUTION! RISK OF INJURY!
uAlways lock the on/off switch 6 to avoid
accidental starting by moving the rotation
direction switch 5 into the centre position
(Lock) before attaching/removing the
battery pack
10
.
¾Removing the battery pack: Press the
battery pack release button
12
. Remove the
battery pack
10
(Fig. D).
¾Attaching the battery pack: Align the
battery pack
10
to the handle and slide it
into it. Ensure it clicks noticeably in place.
The battery pack can only be inserted into
the product in one direction.
Checking the battery pack
charging level
(Fig. B)
¾Check battery pack charge level: Press the
button
13
. The charging level LEDs
14
light up:
LED
14
Charging level
Red / orange / green Maximum
Red / orange Medium
Red Low
Charging the battery pack
(Fig. C)
NOTE
uThe battery pack
10
may be charged at
any time without reducing the life.
uInterrupting the charging process does not
damage the battery pack
10
.
¾Charge the battery pack
10
before
operation when it is at medium or low
charging level.
¾The charging control LEDs (green
17
and
red
18
) indicate the status of the charger
15
and the battery pack
10
:
LED Status
Red LED lights up Battery pack
charges
Green LED lights up Battery pack fully
charged
Green and red LED
flashing
Battery pack
defective
Red LED flashing Battery pack too
cold or too warm
Green LED lights up
(without battery pack)
Charger ready
¾Insert the battery pack
10
into the charger
15
.
¾Connect the power cord with power plug
16
of the charger
15
to the socket.
¾When the battery pack
10
is fully charged:
Remove the battery pack from the charger
15
. Then disconnect the power plug
16
of
the charger from the socket.
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PABSP 20-Li B2 - IAN 322691 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABSP 20-Li B2 - IAN 322691 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info