764032

Parkside PABSP 20-Li B2 - IAN 322691 Manual

37
Zoom out
Zoom in
Previous page
1/132
Next page
36 GB/IE
¾Before operating the product, check whether
the accessory tool is correctly positioned, i.e.
centred in the chuck 1.
¾Screw bits are labelled according to their
dimensions and their shape. If you are
uncertain, always check whether the bit fits
tightly in the screw head without any free
play.
Working instructions
Torque
¾Smaller screws/bits can be damaged if you
set the torque or rotational speed too high.
Hard screw joints (in metal)
¾Particularly high torque occurs, for example
in metal screw joints made using drive
sockets. Select a low rotational speed.
Soft screw joints (e.g. in soft wood)
¾Again, use a low rotational speed, e.g. to
avoid damaging the surface of the wood
upon contact with the screw head. Use a
countersink.
Drilling in wood, metal and other
materials
¾Use a high speed for drill bits with small
diameter and a low speed for drill bits with
large diameter.
¾Select a low speed for hard materials and a
high speed for soft materials.
¾Secure or fasten the workpiece in a clamp or
vice (if possible).
¾Mark the spot where you want to drill
using a centre punch or nail. Select a low
rotational speed when starting.
¾Pull the rotating drill bit from the hole
repeatedly to remove dust and chips and
clear the hole.
Drilling in metal
¾Use a metal drill (HSS). For optimum results,
cool the drill bit with cooling lubricant
(cutting oil). Metal drill bits can also be
used to drill into plastics. Start with a 3 mm
diameter drill bit and then increase the size
until the desired hole diameter is achieved.
Drilling in wood
¾Use a wood drill with a lathe centre.
Deep holes: Use an auger bit.
Large-diameter holes: Use a Forstner bit.
Small screws can be screwed directly into
soft wood.
Belt clip
m CAUTION! RISK OF INJURY!
uBefore hanging the product in the belt:
Push the rotation direction switch 5 to
the centre position (lock). This prevents
the product from being switched on
accidentally.
¾The belt clip 9 allows the tool to be hooked
on belt or pocket.
Cleaning and care
m WARNING!
Always switch the product off, remove
the battery pack
10
and let the
product cool down before performing
inspection, maintenance and cleaning
work!
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PABSP 20-Li B2 - IAN 322691 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PABSP 20-Li B2 - IAN 322691 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info