748155
27
Zoom out
Zoom in
Previous page
1/124
Next page
27
GB IE
Residual Risks
There will always be residual risks
even if you operate this electrical
tool according to the instructions.
The following hazards may occur in
connection with the type and design
of this electric tool:
a) a) Cutting injuries
b) Hearing damage if suitable ear
protection is not worn.
c) Health injuries resulting from the
effect of vibration on the hands
and arms in the event that the
device is used over a longer pe-
riod of time or is not used and
maintained properly.
Warning! During operation,
this power tool produces an

certain circumstances, this

active or passive medical
implants. In order to reduce
the danger of serious or fatal
injuries, we recommend that
individuals who wear medi-
cal implants should consult
their doctor and the manu-
facturer of the implant before
operating the machine.
Assembling instructions
Prior to any work on the implement
always disconnect the plug from the
power socket!
Ensure during assembly that the
power cable is not squeezed and

Assembling the handle bar
B
1. Attach the lower bar (6) to the
appliance housing (8) and fasten
it using the two quick-release le-
vers and washers (7). The smooth
side of the washer should point
towards the quick-release lever;
the grooved side should point
towards the device.
2. Screw both central bars (5) with
the screws, quick-release levers
and washers (4) to the lower bar
(6). The smooth side of the washer
should point towards the quick-
release lever; the grooved side
should point towards the device.
3. Suspend the mains cable strain
relief (14) from the upper handle-
bar (3).
4. Screw the upper handlebar (3)
with the screws, quick-release
levers and washers (4) to both
central bars (5) to fasten.
5. Fasten the machine cable (15) to
the bar using the machine cable
terminals (11).
Mounting and emptying the
collection bag
WARNING: Never operate the
implement without the impact
protector. Danger of Injury!
The collection bag is only intended
for operation with the aerator cylin-
der (
A
16).
C
1. Pull the collection bag over the rods.
2. Put the plastic straps of the col-
lection bag over the collection
bag rods and clip into the plastic
straps.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310320 PLV 1500 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310320 PLV 1500 A1 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info