Manual Parkside IAN 310320 PLV 1500 A1 (page 29 of 124) (English, German, Dutch, Danish, French, Polish)

748155

Zoom out

Zoom in

1/124

GB IE

Release the starting lever and reset

the implement after a cooling down

period of approx. 1 minute.

WARNING! The cylinder con-

tinues to run for a brief pe-

riod after the implement has

been switched off. Do not tilt

or carry the implement while

the motor is still running and

do not touch the cylinder

while it is still rotating. Dan-

ger of injury!

Working with the implement

To maintain a well cared-for lawn it should

be aerated every 4 to 6 weeks.

Verticuting is a more intensive intervention

than aerating and should only be carried out

once a year, the best time being in spring af-



When working on slopes

always proceed across the

slope. Be particularly careful

when walking backwards

and pulling the implement.

Danger of stumbling!

After work and to transport the imple-

ment disconnect the power plug and

wait until the cylinder is standing still.

The shorter the grass, the better the

lawn can be treated. Furthermore, the

implement is less stressed and the ser-

vice life of the cylinder is prolonged.

• The implement can be operated with or

without the collection bag.

Recommendation: Work with the collec-

tion bag for aerating and without the

collection bag for verticuting.

• Mow the lawn to the required grass

height.

 

may otherwise wind around the scari-



equipment.

• Select the appropriate working or

readjustment position (in the event of

cylinder wear) so that the implement is

not overloaded.

• Commence work in the vicinity of the

power socket and proceed away from

the socket.

• Always ensure that the extension cable is

behind you, and after turning move it to

the side that has already been treated.

• Guide the implement at a walking

pace down lanes that are as straight as

possible. To ensure uninterrupted aerat-

ing or verticuting the individual lanes

should always overlap by a few centi-

metres. Dwelling too long at the same

place while the implement is running

can damage the grass sward.

• To ensure that the extension cable is not

an impediment, turn the implement in

such a manner that the cable strain re-

lease on the bar always faces the side

that has been treated.

• Always clean the implement after each

use (see “Cleaning/Maintenance”).

• After having treated lawns with dense

moss growth, it is advisable to reseed

the lawn so that it can regenerate itself

quicker.

Transport

• Adjust the transport position (+10 mm)

setting (see “Setting the Working Posi-

tion”) when transporting the implement.

• Lift the implement to transport it over

steps and sensitive surfaces (e.g. tiles).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310320 PLV 1500 A1 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 310320 PLV 1500 A1 Manual

Product: