748155
28
Zoom out
Zoom in
Previous page
1/124
Next page
28
GB IE
Mounting the collection bag on the
implement:
3. Lift the impact protector (13).
4. Push the pins on the collection
bag rods into the socket in the
implement case.
5. Release the impact protector so
that it holds the collection bag
(12) in its position.
Removing and emptying the collec
-
tion bag:
6. Lift the impact protector (13) and
take out the collection bag (12).
Operation
Please observe local regulations
concerning noise protection.
Setting the working posi-
tions
The implement has 5 principal position
settings:
+10 mm : Transport position
This position sets the maximum safety spac
-

-3 mm : Working position
Set this position when working with a new
implement.
-3 to -12 mm : Readjustment
positions
The working position can be lowered with
increased knife and sprung tine wear.

-
ingly poor result.
The readjusting depth amounts to approx.
3 mm per setting.
When the implement is deliv-
ered it is in the Transport Position

1. The implement must be switched off to
set the working position.
2. Adjust the depth adjustment lever (
A
10) and allow it to lock into place in
the desired position.
Selection of a readjustment position
without the corresponding wear can
overload the motor and damage the
cylinder.
Switching on and off
Before switching on the imple-
ment ensure that it is not in
contact with any objects. Keep
your feet and hands well away
from the cylinder and the ejec-
tor opening. Danger of injury!
D
1. Place the implement on a level
lawn surface.
2. Connect the extension cord to
the appliance socket (18).
3. Form a loop in the end of the ex-
tension cord and hang it into the
strain relief (14).
4. Connect the implement to the
mains voltage.
5. To switch on, press the electronic
switch lock (1) on the handlebar
and then pull the start handle (2)
towards the handlebar. Release
the electronic switch lock (1).
6. To switch off release the starting
lever (2).
Overload protection: The mo-
tor is automatically switched off
when the implement is overloaded.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310320 PLV 1500 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310320 PLV 1500 A1 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info