748155
25
Zoom out
Zoom in
Previous page
1/124
Next page
25
GB IE
Never operate the implement
without the attached collection
bag or impact protector. Dan-
ger of injury! Always keep well
away from the ejector opening.
Do not operate the implement in
-
uids or gases as this could give

explosion.
Always disconnect the plug from
the mains socket before working.

After the implement has been
turned off, the cutting cylinder
will continue to rotate for a few
seconds. Keep hands and feet
well away.
Do not touch the spring tines be-
fore the implement has been dis-
connected from the mains and
the spring tines have come to a
complete standstill. Risk of injury
owing to a sharp implement!
Only remove plant parts when the
implement is standing completely
still. Ensure that the grass ejec-
tor opening is clean and free.
Switch off the power when the
implement is to be transported,
lifted or tilted and when travers-
ing other surfaces than grass.
Children must never play with
the device.
Always switch off the implement
and disconnect the power plug:-
- Whenever you leave the im-
plement
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not
being used
- During all maintenance and
cleaning work
- When the power cable is dam-
aged or has become tangled
- When the implement hits an
obstruction during work or
when unusual vibrations arise.
Establish the cause and see if
the implement has been dam-
aged. Do not repair it yourself!
Have the implement repaired
by an authorised workshop!
Store the implement in a dry
place well out of reach of
children.
CAUTION! The following
states how to avoid damage
to the implement and any re-
sulting harm to people:

Switch off the power when
the implement is to be carried
across steps.
Inspect the implement each time
before it is to be used. Never
operate the implement if safety
devices (e.g. impact protector,
parts of the cutting facility or
bolts are missing, worn out or
damaged. Check especially the
power cable and starting lever
for damage. To avoid imbal-
ance, all tools and bolts must be
exchanged as complete sets.
Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer. The use of alien parts
results in the immediate loss of
all guarantee claims.
Ensure that all nuts, bolts and

25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310320 PLV 1500 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310320 PLV 1500 A1 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info