Manual Parkside IAN 310320 PLV 1500 A1 (page 24 of 124) (English, German, Dutch, Danish, French, Polish)

748155

Zoom out

Zoom in

1/124

GB IE

ensures that the equipment re-

mains safe.

• Before starting the equipment, en-

sure that no objects or branches

are pushed into the blade open-

ing, that the equipment is stand-

ing stably and that the work-

space is tidy and not blocked.

Check the condition of your ex-

tension cable and the connecting

cable of your equipment. Use the

necessary protective equipment.

There is a risk of injury.

• If your equipment vibrates or emits

unusual noises when switched

on, disconnect the plug from

the socket and check the cutting

cylinder. Ensure that no remains

of chopped matter are blocking

the cutting cylinder or jammed



problems, return the equipment to

a customer service centre.

• If the blades no longer cut cor-

rectly or if the motor is over-

loaded, check all the parts of

your equipment and replace the

worn parts. If a more extensive

repair is required, contact a cus-

tomer service centre.

Use:

• CAUTION – A very sharp tool.



toes. While working always



away from the cutting cylinder

and the ejector opening. There

is the danger of serious injury!

• Do not operate the implement

while it is raining, in poor weather

conditions and when the surround-

ing area and lawn are wet. Op-

erate the implement only during

daylight hours or with bright light-

ing. There is a risk of accidents.

• Do not operate the implement if

you are tired or are lacking in

concentration and after having

drunk alcohol or taken medi-

cine. Always take a work break

in due time. Approach the work

with common sense. A moment

of carelessness when using the

equipment can result in serious

injury.

• Familiarize yourself with the

terrain and remain focused on

the potential hazards that you

could miss on account of the

motor noise.

• Always maintain a secure foot-

ing while working, especially

on a sloping terrain. Always

work across slopes - never up

and down! Be particularly care-

ful when changing the travelling

direction. Do not work on very

steep slopes. This enables you

to control the equipment better

in unexpected situations.

• Avoid an abnormal body posture.

• Always guide the implement at

a walking pace with both hands

on the handle. Be especially

careful when you turn the imple-

ment around or draw it towards

you. Danger of stumbling!

• Start or actuate the starting lever

with care and in conformity with

the directions in these Instructions.

• Do not tilt the implement when

starting, other than it has to be

lifted. In this case tilt the imple-

ment only to the extent that is ab-

solutely necessary and always

lift the implement on the side that

is opposite to the operator.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310320 PLV 1500 A1 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 310320 PLV 1500 A1 Manual

Product: