Manual Parkside IAN 307044 PKS 2200 A1 (page 44 of 196) (English, German, Dutch, French, Polish)

749294

Zoom out

Zoom in

1/196

GB IE

Tensioning the saw chain

Regularly tightening the saw chain pro-

vides safety for the user and reduces and/

or prevents wear and chain damages.

Before the start of work and in approx. 10

minute intervals, we recommend the user to

examine the chain tension and correct it, if

necessary.

The chain warms up when working with

the saw and thus expands slightly. These

“expansions” can be expected especially

from newer chains.

Do not re-tighten or change the

chain when it is hot because it

shrinks slightly once it has cooled

down. In case of non-observance,

this can lead to damages on the

guide rail or the engine because

now the chain is too taut on the

blade. Chain tension and chain lu-



on the service life of the chain.

The chain is correctly tensioned if it does

not sag at the rail underside and can be

rotated completely around with the gloved

hand. When the saw chain is tensioned

with 9 N (approx. 1 kg), the gap between

the saw chain and the guide rail may not

be more than 2 mm.

10 min

1. Ensure that the chain brake has

been released, that is, that the

chain brake lever (3) is pulled up

against the front grip (16).

2. Unscrew the fastening bolt (7)

( ).

3. To tension the saw chain, turn

the screw (9) for the chain quick-

tensioning system in clockwise

direction.

To loosen the tension, turn the

screw (9) in counter-clockwise

direction.

4. Tighten up the fastening bolt (7)

again ( ).

With a new saw chain, you must

readjust the chain tension after at

least 5 cutting operations.

Chain lubrication

The rail and chain must never be

without oil. If you operate the elec-

tric chainsaw with too little oil, the

cutting performance and the lifetime

of the saw chain is reduced, since

the chain becomes blunt faster. You

can identify a case of too little oil

where smoke development or dis-

coloration of the rail occurs.

As soon as the motor is speeded up, the oil



4).

Filling up with chain oil:

• Check the oil level indicator (

21)

regularly and top-up the oil if the mini-

mum mark „MIN“ (

22) is reached on

the oil level indicator. The oil tank holds

about 250 ml of oil.

• Use Parkside bio-oil; this product contains

additives that reduce wear and tear and

does not damage the pump system. bio-

oil is available from our Service-Center.

• If you have no Grizzly bio-oil available,

use chain lubrication oil with low adhe-

sive additive content.

• Empty the oil tank before longer periods

(6-8 weeks) of non-use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 307044 PKS 2200 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 307044 PKS 2200 A1 Manual

Product: